2018 Adhesives and Sealants Equipment Guide

1-42 | Melters
Fulfill ® Retrofit
Adhesive Fill System
Specifications
Parameter
Specification
Fits Nordson melters ProBlue 4, 7, 10, 15, 30, 50
Mesa 4, 6, 9, & 14
DuraBlue & VersaBlue 25, 50 & 100 (VA & VT)
DuraBlue & AltaBlue 10/16
AltaBlue 30/50 (TS)
FM 200
Universal
Adhesive forms
Pellets, pastilles, mini-slats,
Maximum size
• Pastilles: 12 mm (0.472 in) diameter
Adhesive transfer maximum delivery rate
Adhesive storage container
Transfer hose length
Total air consumption
Air conditioning
Operating air pressure - dynamic
• Minimum Pressure
• Maximum Pressure
Operating air pressure - static
• Maximum Pressure
Inlet air connection
Electrical service
Power cord
Suction lance dimensions (optional)
Dimensions
Single-feed adhesive bin clearance
Multi-feed adhesive bin clearance
Storage container capacity (single-feed, 120L)
Enclosure rating
Noise emissions
• Mini-slats: 12 mm x 12 mm (0.472 x 0.472 in) in length
275 kg/hr (600 lb/hr) dependent on adhesive type and air pressure
See Adhesive Store Containder data sheet
4 m (13 ft), 9 m (29.5 ft), 18 m (59 ft)
• 17 CFM @ 3.4 bar to transfer 105.3 kg/hr
(223.2 lb/hr) with 4m hose @ 4m rise
• 22 CFM @ 4.1 bar to transfer 112.5 kg
(248 lb/hr) with 9m hose @ 4m rise
• 30 CFM @ 6.2 bar to transfer 90.7 kg/hr
(200 lb/hr) with 18m hose @ 4m rise
Dry, non-lubricated
2.75 bar, (0.275 MPa or 40 psi)
5.5 bar (0.55 MPa or 80 psi)
6.9 bar (0.69 MPa or 100 psi)
¼-in. NPT female
¼-in. BSPP female
G ¼ female
100-240 single phase
Customer supplied, 14-18 AWG
(L) 615 mm x max (W) 105 mm
(24.21 in. x max 4.14 in.)
(W) 480 mm x (D) 554 mm x (H) 917 mm (19 x 22 x 36 in)
(W) 688 mm x (D) 667 mm x (H) 1656 mm (26 x 27 x 65 in)
40 kg (88 lb) usable with grate
64 kg (141 lb) usable without grate
IP54
76 dBA
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com