2018 Adhesives and Sealants Equipment Guide

12-2 | Hoses
Advanced Technology Hot Melt Hoses
Specifications
Maximum operating temperature
Maximum hydraulic pressure (1)
5/16 in., 1/2 in., MPa (psi)
1-1/8 in. MPa (psi)
5/8 in. MPa (psi)
Parameter
230 °C (450 °F)
10.34 (1,500)
8.27 (1,200)
6.894 (1,000)
Specification
Electrical service
Approvals and certifications
Estimated hose weight with adhesive
(1)
Varies with hose diameter.
240 VAC, 200 VAC, 50/60 Hz
UL, CUL, TÜV, CE (RTD versions only)
5/16 in. hose, appx. 1/2 pound per foot
5/8 in. hose appx. 1 pound per foot
Wattage Calculations for Hoses and Applicators on the PA2500 System
Pump Type Wattage for Hoses and Applicators = Hose Wattage + Applicator
Piston
900 Watts (Max.)
(ft/Hose) X 30 W for HP hoses (450 °F Max.)
OR
(ft/Hose) X 20 W for Standard (375 °F Max.)
Applicator Wattage (1)
Gerotor
645 Watts (Max.)
(ft/Hose) X 30 W for HP Hoses (450 °F Max.)
OR
(ft/Hose) X 20 W for Standard (375 °F Max.)
Applicator Wattage (1)
(1)
Applicator Wattages: AD-31 80 W CF-201 150 W
AD-41 100 W
SolidBlue S 150 W
FP-200 160 W
Wattage Calculations for Manual Applicators and Hoses for 120V DuraBlue
Melters
Max. Wattage
for Any Hose
or Applicator
Max. Wattage
for a Hose/
Applicator Pair
500 W 600 W
Total Wattage Limitation for all
Hoses and Applicators
Max.
Wattage
1045 W
985 W
Melter Model
D4L and D10L
(22 kg/hr)
D10L and D16L
(45 kg/hr)
= Hose Wattage + Applicator
Length (ft) X 30 W/ft for HP Hose
(450 °F max) OR
Length (ft) X 20 W/ft for Standard Hose
(375 °F max)
AD-41 - 100 W
FP-200 - 160W
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com