2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Automated Dispensing Systems | 5-15
Unity PURJet 30 and 300
Dispensing Systems
Part Numbers
Basic PURJet30 System
Part Number Description Note
1099056 Applicator, Unity, PJ30, Ni120
1120888 Kit, Ship-With, PURJet 30
1123363 Module, PJ30, Fixed, 0.004 Orifice., 1 mm Tip Other jet modules are available. Refer to Modules.
7412901 Controller, Unity Touch*
Basic PURJet 300 System
Part Number Description Note
7407659 Applicator, Unity, PJ300, Ni120
1120888 Kit, Ship-With, PURJet 30
1123363 Module, PJ30, Fixed, 0.004 Orifice., 1 mm Tip Other jet modules are available. Refer to Modules.
7412901 Controller, Unity Touch*
1107104 Kit, Regulator, Seperator, Filter, Combo, Air Kit, PJ30
*Unity Touch controllers provide dispensing control for Unity PURJet applicators.
Modules
Part Number
Description
1123363 Module, PJ30, Fixed, 0.004 Orifice., 1 mm Tip
1123367 Module, PJ30, Fixed, 0.004 Orifice., 1.5 mm Tip
1124096 Module, PJ30, Fixed, 0.004 Orifice., 2.6 mm Tip
1124718 Module, PJ30, Fixed, 0.004 Orifice, 0.75 mm Tip, 0.35 Stroke
1124845 Module, PJ30, Fixed, 0.004 Orifice, 0.75 mm Tip, 1.25 Stroke
1124846 Module, PJ30, Fixed, 0.004 Orifice, 0.75 mm Tip,1.50 Stroke
1124847 Module, PJ30, Fixed, 0.004 Orifice, 1.6 mm Tip, 0.50 Stroke
1124719 Module, PJ30, Fixed, with Nozzle Adapter
1123362 Module, PJ30, Adjustable, 0.004 Orifice, 1 mm Tip
1123366 Module, PJ30, Adjustable, 0.004 Orifice, 1.5 mm Tip
1123361 Module, PJ30, Fixed, 0.007 Orifice, 2.6 mm Tip
Robots
Unity IC Series systems are designed for use with Unity Basic and Unity 4XP robots. Refer to the Unity Basic and
Unity 4XP Series sections of this guide for complete details and part numbers for Unity robots.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com