2018 Adhesives and Sealants Equipment Guide

7-58 | Automatic Applicators
E-400 Series Electric Applicators
E-400B Applicator Specifications
Item Specification Note
Adhesive viscosity up to 1.200 cps A
Operating hydraulic pressure
Operating temperature
82 bar (1,200 psi)
103.4 bar (1,500 psi) maximum
175 °C (350 °F) nominal
190 °C (375 °F) maximum
Operating speed up to 6,000 cycles per minute A
A
Nozzle selection (bead)
Electrical service
Any standard nozzle or Saturn precision nozzle
220−240 VAC, 50/60 Hz
NOTE
A: Actual cycle rates and maximum operating temperatures depend on the application. Use the ES-400 Application Guide
software to determine the operating speeds for a specific application.
Torque Specifications
Dimensions
Item
Hose connector
Bead nozzle
E-400B module bracket
(clamp) screw
Torque Specification
10−14 N•m (7−10 ft-lb)
4.5 N•m (40 in.-lb)
1.7 N•m (15 in.-lb)
9 60 mm
(0 38 in )
94 38 mm
(3 72 in ) 78 51 mm
(3 09 in )
9 86 mm
(0 39 in )
24 89 mm
(0 98 in )
12 45 mm
(0 49 in )
51 59 mm
(2 03 in )
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com