2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Web Content
Automatic Applicators | 7-57
E-400 Series Electric Applicators
Description
The E-400B applicator dispenses hot melt adhesive in
bead form. An applicator driver provides all-electric
actuation, eliminating the need for compressed air.
Adhesive enters the inlet port of the E-400B applicator
and flows through the manifold into the module seat,
which is sealed by the end of the armature. When the
coil is energized by the applicator driver, the armature
lifts off the seat, allowing adhesive to flow. The armature
is held off the seat by the magnetic attraction of the
coil. When the applicator driver de-energizes the coil,
the coil loses its magnetic attraction and the armature
is forced back into the seat by a return spring, stopping
the adhesive flow.
E-400B applicators are available in top and rear feed
configurations.
The E-400 BAS module’s hydraulic section can be easily
disassembled for easy cleaning.
E-400 BAS uses standard Saturn nozzles.
Intended Uses
The E-400B applicator is designed for
• Industrial applications that require the deposition of a precise
bead of hot melt adhesive onto a moving substrate
• Small diameter hoses designed and manufactured by Nordson
Corporation
• Electric applicator drivers and pattern controllers designed
and manufactured by Nordson Corporation
Contact your Nordson Representative for additional configurations.
Selection Chart
E400 Electric Applicator
Part
Number
Description
1031013 ES401-RC-T-F, Rear Feed Applicator
1031635 ES401-RC-T-F, Top Feed Applicator
1122275
E400-01-F. Applicator For Use With Freedom
System
1086385 Module Service Kit, E-400B B, Bead, Stl Seat
E-400B Drivers
The E-400B driver will work for most applications.
Use the E-400B Driver Application Guide software to
determine if the driver will work for your application. To
access the E-400 Application Guide, go to www.enordson.
com/support and select the E-400 Application Guide link
to download the software.
Part
Description
1045869 Driver, E-400B, Non-Programmable, High-Viscosity
1039761 Cable, Applicator-to-Driver, E-400B, 12 m
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com