2018 Adhesives and Sealants Equipment Guide

1-4 | Melters
Freedom ® Hot Melt Adhesive
Dispensing System
Optix Controls
• Text-based fault and diagnostic messaging
• Component identification functionality
• Choice of languages
• Touch screen GUI
Program storage
Service intervals
Item
Password protection
Touch screen
50 with customer-defined name
Specification
1 customer settable (with customer-defined name)
3 levels, numerical
7-inch color, (800 x 480 WVGA)
EcoBead Intermittent Bead Capability
Pre-programmed patterns 10 per glue savings selection (total of 40)
Adhesive savings 30, 40, 50, or 60%
Beads per product 1 to 8
Automatically identified components
Displayed information
Electronic nameplate information
Inputs
Input voltage
Outputs
Output type
Contact rating
Stability
Temperature range
PID control values
Hoses, applicators, melter
System Inventory
Part number, serial number, installation date
Watts, amps, voltage
Input/Output Interface
4, customer assignable functions
10 to 30 VDC, polarity insensitive
3, customer assignable functions
N.O. potential-free contact; all open when melter is off
240 VAC @ 2 A and 30 VDC @ 2 A
Temperature Control
± 0.5 °C (± 1 °F)
40 to 204 °C (100 to 400 °F)
Optimized by component I.D.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com