2018 Adhesives and Sealants Equipment Guide

1-12 | Melters
Freedom ® Hot Melt Adhesive
Dispensing System
Parts and Accessories
Solenoid Valve-to-Melter Cables
Part Descri[tion Note
1100687 Cable Assy, Sol, M8, 3-wire, 5 m
1100958 Cable Assy, Sol, M8, 3-wire, 10 m
1100688 Cable Assy, Sol, 90-degree, M8, 3-wire, 5 m
1100959 Cable Assy, Sol, 90-degree, M8, 3-wire, 10 m
1121988 Kit, Cable, Extension, Sol, M8, 0.3 m Lg A
1121989 Kit, Cable, Extension, Sol, M8, 90-degree, 0.3 m Lg A
1121990 Kit, Cable, Splitter, Sol, M8,1 m TO 2F, 0.3 m LG A
NOTE A: These extension and splitter cables can be used for additional routing configurations.
Hose-to-Applicator Fittings
Hose Size
8 mm (5/16 in.),
9/16 in. x 18 threads,
37-degree JIC, size 6
Applicator Body
Thread Size
9/16 in. x 18 threads,
with O-ring
Hose-to-Applicator
Fitting Part Number
Description
972628 Straight fitting
972647 45-degree swivel fitting
972646 90-degree swivel fitting
Optional Equipment
Part Description Note
1030537 Kit, Gauge, 1500 psi —
1121239 Kit,Freedom,Mount,Floor,Fixed,DS1
1121243 Kit,Freedom,Bench Support,DS1 A
1121234 Kit,Freedom,Caster Plate, DS1 B
1122108 Kit,Base Plate,Stand,Freedom C
NOTE A: The melter bench stand is height-adjustable.
B: Casters are for the melter floor stand only.
C: This kit allows the melter to be free-standing, but not on casters.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com