2018 Adhesives and Sealants Equipment Guide

13-10 | Controls
Concert Series Controllers
Specifications — Basic Flow Controller
Parameter
Number of flow channels Supports up to 2
Control modes
Pressure transducer inputs Supports up to 2
Pressure transducer options
Line speed reference inputs 1
Line speed reference outputs
Operating temperature range
Ambiet temperature range
Temperature control stability
Temperature control sensor options
Maximum heating capacity
Channel 1,2 (each)
Channel 3
Electrical requirements
Input/Output capability
Weight (approx.)
Ingress protection
Specification
Manual, Pressure, Gear to Line, Flow w/Pressure Build
0-10 VDC, 4-20 mA
0-10 VDC, 4-20 mA
40 to 204 ºC (100 to 400 ºF)
0 to 50 ºC (32 to 122 ºF)
±1 ºC (2 ºF)
Nickel 120 Ohm RTD, Platinum 100 Ohm RTD
1,200 watts per channel/1,000 watts per zone
2,800 watts per channel/1,800 or 1,000 watts per zone
200/240 VAC 50/60 Hz, single-phase
240 VAC 50/60 Hz, 3-phase
4 inputs/3 outputs
30 lb
IP33
Specifications — Basic Temperature Controller
Parameter
Specification
Number of channels 3
Operating temperature range
40 to 204 ºC (100 to 400 ºF)
Ambiet temperature range
0 to 50 ºC (32 to 122 ºF)
Temperature control stability
±1 ºC (2 ºF)
Temperature control sensor options Nickel 120 Ohm RTD, Platinum 100 Ohm RTD
Maximum heating capacity
Channel 1,2 (each)
Channel 3
Electrical requirements
Input/Output
Weight (approx.)
Ingress protection
1,200 watts per channel/1,000 watts per zone
2,800 watts per channel/1,800 or 1,000 watts per zone
200/240 VAC 50/60 Hz, single-phase
240 VAC 50/60 Hz, 3-phase
4 inputs/3 outputs
30 lb
IP33
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com