2018 Adhesives and Sealants Equipment Guide

More documents

Recommendations

Info

7-48 | Automatic Applicators AG-900 + S Dispensing Module Specifications Operating temperature • Cold • Hot Parameter Ambient 230 °C (450 °F) max Specification Regulated pressure MPa (psi) 10.34 (1,500) Maximum input pressure MPa (psi) 3000 psi @ 121 °C (250 °F) / 1500 psi above 121 °C (250 °F) Operating air pressure MPa (psi) 0.41–0.69 (60–100) Operating speed 3,200 cycles/minute Viscosity range centipoise 1,000–1,000,000 Electrical service 220–240 VAC, 50/60 Hz 270 W (applicator/regulator), 100 W (swivel) Weight kg (lb) • Cold • Heated 1.8 (4.0) 2.5 (5.5) SINGLE POSITION ACTUATOR REGULATOR REGULATOR ADJUSTMENT MATERIAL IN Y AXIS SWIVEL APPLICATOR NEEDLE NOZZLE X AXIS SWIVEL To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com. International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Adhesive & Sealants Equipment Guide Automatic Applicators | 6-49 AG-900 + S Dispensing Module This page intentionally blank To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com. International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Page 1 and 2:
Adhesives & Sealants Guide 2018-201
Page 3:
Purpose Using the Guide The Adhesiv
Page 6 and 7:
ii | Table of Contents Table of Con
Page 8 and 9:
iv | Table of Contents Table of Con
Page 10 and 11:
vi | Table of Contents Table of Con
Page 12 and 13:
viii | Table of Contents Table of C
Page 14 and 15:
x | Table of Contents Table of Cont
Page 16 and 17:
xii | Table of Contents Table of Co
Page 18 and 19:
xiv | Table of Contents Table of Co
Page 20 and 21:
xvi | Table of Contents Table of Co
Page 22 and 23:
xviii | Table of Contents Table of
Page 24 and 25:
xx | Table of Contents Table of Con
Page 26 and 27:
xxii | Table of Contents Table of C
Page 28 and 29:
1-2 | Melters Freedom ® Hot Melt A
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
1-10 | Melters Freedom ® Hot Melt
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
1-16 | Melters ProBlue Liberty Inte
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
1-22 | Melters ProBlue ® Series Me
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
1-34 | Melters ATS Retrofit Kit Ext
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
1-42 | Melters Fulfill ® Retrofit
Page 70 and 71:
1-44 | Melters Fulfill ® Retrofit
Page 72 and 73:
1-46 | Melters AltaBlue TT Adhesive
Page 74 and 75:
1-48 | Melters AltaBlue TT Adhesive
Page 76 and 77:
1-50 | Melters AltaBlue Touch Serie
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
1-56 | Melters DuraBlue ® L Series
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
1-62 | Melters DuraBlue ® Large Ca
Page 90 and 91:
1-64 | Melters DuraBlue ® Large Ca
Page 92 and 93:
1-66 | Melters VersaBlue ® Plus Se
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
1-72 | Melters VersaBlue ® Adhesiv
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
1-78 | Melters VersaBlue ® N Adhes
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
1-84 | Melters VersaBlue ® XN and
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
1-94 | Melters VersaBlue ® N, XN,
Page 122 and 123:
1-96 | Melters EZ Melt Series Adhes
Page 124 and 125:
1-98 | Melters EZ Melt Series Adhes
Page 126 and 127:
2-2 | Foam Systems SureFoam Dispen
Page 128 and 129:
2-4 || Foam Systems Ultra FoamMix
Page 130 and 131:
2-6 | Foam Systems Ultra FoamMix C
Page 132 and 133:
2-8 | Foam Systems Ultra FoamMix E
Page 134 and 135:
2-10 | Foam Systems Ultra FoamMix
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
2-16 | Foam Systems FoamMelt ® Pro
Page 142 and 143:
2-18 | Foam Systems FoamMelt ® Pro
Page 144 and 145:
3-2 | Bulk Melters VersaDrum ® 200
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
3-8 | Bulk Melters VersaPail ® 20-
Page 152 and 153:
3-10 | Bulk Melters VersaPail ® 20
Page 154 and 155:
3-12 | Bulk Melters VersaPail ® 20
Page 156 and 157:
3-14 | Bulk Melters DuraDrum ® Bul
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
3-20 | Bulk Melters DuraPail ® Bul
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
4-2 | PUR Melters PURBlue 4 Adhesiv
Page 170 and 171:
4-4 | PUR Melters PURBlue 4 Adhesiv
Page 172 and 173:
4-6 | PUR Melters VersaPUR Slug Mel
Page 174 and 175:
4-8 | PUR Melters VersaPUR Slug Mel
Page 176 and 177:
4-10 | PUR Melters VersaPUR Slug Me
Page 178 and 179:
4-12 | PUR Melters VersaPUR Tank Me
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
4-18 | PUR Melters MiniPUR Plus Pol
Page 186 and 187:
4-20 | PUR Melters MiniPUR Plus Pol
Page 188 and 189:
5-2 | Automated Dispensing Systems
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
6-2 | Extruder Systems EX Extruder
Page 208 and 209:
6-4 | Extruder Systems EEX Extruder
Page 210 and 211:
6-6 | Extruder Systems EEX Extruder
Page 212 and 213:
7-2 | Automatic Applicators Best Ch
Page 214 and 215:
7-4 | Automatic Applicators Best Ch
Page 216 and 217: 7-6 | Automatic Applicators Best Ch
Page 218 and 219: 7-8 | Automatic Applicators Best Ch
Page 220 and 221: 7-10 | Automatic Applicators SolidB
Page 222 and 223: 7-12 | Automatic Applicators SolidB
Page 224 and 225: 7-14 | Automatic Applicators SureBe
Page 226 and 227: 7-16 | Automatic Applicators SureBe
Page 228 and 229: 7-18 | Automatic Applicators Select
Page 230 and 231: 7-20 | Automatic Applicators Select
Page 232 and 233: 7-22 | Automatic Applicators MiniBl
Page 246 and 247: 7-36 | Automatic Applicators EcoBea
Page 256 and 257: 7-46 | Automatic Applicators Patter
Page 262 and 263: 7-52 | Automatic Applicators Series
Page 268 and 269: 6-50 | Automatic Applicators AG-900
Page 270 and 271: 7-52 | Automatic Applicators AG-900
Page 272 and 273: 7-54 | Automatic Applicators e.dot+
Page 274 and 275: 7-56 | Automatic Applicators e.dot+
Page 276 and 277: 7-58 | Automatic Applicators E-400
Page 282 and 283: 7-64 | Automatic Applicators SureSe
Page 284 and 285: 7-66 | Automatic Applicators SureSe
Page 286 and 287: 8-2 | Non-Contact Universal Applica
Page 288 and 289: 8-4 | Non-Contact AltaSpray Plus Ap
Page 290 and 291: 8-6 | Non-Contact AltaSpray Plus Ap
Page 292 and 293: 8-8 | Non-Contact Non-Contact Adhes
Page 294 and 295: 8-10 | Non-Contact Non-Contact Adhe
Page 296 and 297: 8-12 | Non-Contact Non-Contact Adhe
Page 298 and 299: 8-14 | Non-Contact Spray Nozzles Co
Page 302 and 303: 8-18 | Non-Contact Spray Nozzles Un
Page 304 and 305: 8-20 | Non-Contact Spray Nozzles Su
Page 306 and 307: 8-22 | Non-Contact Spray Nozzles Si
Page 308 and 309: 8-24 | Non-Contact Spray Nozzles Si
Page 310 and 311: 8-26 | Non-Contact SureWrap ® Nozz
Page 314 and 315: 8-30 | Non-Contact Process Air Cont
Page 316 and 317:
9-2 | Hand-Held Applicators Series
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
9-12 | Hand-Held Applicators AD-31
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
9-20 | Hand-Held Applicators Select
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
10-2 | Coating Heads Speed-Coat ®
Page 346 and 347:
10-4 | Coating Heads Speed-Coat ®
Page 348 and 349:
10-6 | Coating Heads TrueCoat ® Sl
Page 350 and 351:
10-8 | Coating Heads TrueCoat ® Sl
Page 352 and 353:
10-10 | Coating Heads TrueCoat ® F
Page 354 and 355:
10-12 | Coating Heads TrueCoat ® F
Page 356 and 357:
10-14 | Coating Heads EZ Coat Slot
Page 358 and 359:
10-16 | Coating Heads EZ Coat Slot
Page 360 and 361:
10-18 | Coating Heads AltaSlot Appl
Page 362 and 363:
10-20 | Coating Heads AltaSlot Appl
Page 364 and 365:
10-22 | Coating Heads EB 60 Flex Ed
Page 366 and 367:
10-24 | Coating Heads EB 60 Flex Ed
Page 368 and 369:
10-26 | Coating Heads EP 48 PRO Boo
Page 370 and 371:
10-28 | Coating Heads EP 48 PRO Boo
Page 372 and 373:
11-2 | Nozzles Precision Bead Nozzl
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
11-10 | Nozzles Precision Bead Nozz
Page 382 and 383:
11-12 | Nozzles Specialty Nozzles N
Page 384 and 385:
11-14 | Nozzles Specialty Nozzles B
Page 386 and 387:
11-16 | Nozzles Specialty Nozzles T
Page 388 and 389:
11-18 | Nozzles Nozzle Accessories
Page 390 and 391:
11-20 | Nozzles Pattern Width Graph
Page 392 and 393:
12-2 | Hoses Advanced Technology Ho
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
12-10 | Hoses Advanced Technology H
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
13-2 | Controls Spectra 30 Control
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
13-10 | Controls Concert Series Con
Page 420 and 421:
13-12 | Controls Concert Series Con
Page 422 and 423:
13-14 | Controls LogiComm ® Contro
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
13-26 | Controls LA 404-2 Pattern C
Page 436 and 437:
13-28 | Controls LA 404-2 Pattern C
Page 438 and 439:
13-30 | Controls Seal Sentry ® Ser
Page 440 and 441:
13-32 | Controls Accubar Barcode Ve
Page 442 and 443:
13-34 | Controls Accubar Barcode Ve
Page 444 and 445:
13-36 | Controls Applicator Driver
Page 446 and 447:
13-38 | Controls LogiComm ® Applic
Page 448 and 449:
13-40 | Controls LogiComm ® Applic
Page 450 and 451:
13-42 | Controls LogiComm ® OEM Ap
Page 452 and 453:
13-44 | Controls LogiComm ® OEM Ap
Page 454 and 455:
13-46 | Controls e driver Specifica
Page 456 and 457:
14-2 | Auxiliary Equipment Nitrogen
Page 458 and 459:
14-4 | Auxiliary Equipment Nitrogen
Page 460 and 461:
14-6 | Auxiliary Equipment ProMeter
Page 462 and 463:
14-8 | Auxiliary Equipment ProMeter
Page 464 and 465:
14-10 | Auxiliary Equipment VDK Mid
Page 466 and 467:
14-12 | Auxiliary Equipment VDK Met
Page 468 and 469:
14-14 | Auxiliary Equipment PS Mete
Page 470 and 471:
14-16 | Auxiliary Equipment PS Mete
Page 472 and 473:
15-2 | Liquid Adhesive Equipment LA
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
15-10 | Liquid Adhesive Equipment L
Page 482 and 483:
15-12 | Liquid Adhesive Equipment P
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
15-18 | Liquid Adhesive Equipment W
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
15-52 | Liquid Adhesive Equipment H
Page 524 and 525:
16-2 | Accessories In-Line Filters
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
16-8 | Accessories Solenoid Valves
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
16-14 | Accessories Fittings and Co
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
16-22 | Accessories Hydraulic Syste
Page 546 and 547:
16-24 | Accessories Multi-Service D
Page 548 and 549:
17-2 | Technical Data Conversion Fo
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556:
17-10 | Technical Data Conversion F
show all

2018 Adhesives and Sealants Equipment Guide

Create successful ePaper yourself

Delete template?

Save as template?