02.02.2018 Views

2018 Adhesives and Sealants Equipment Guide

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

1-58 | Melters<br />

DuraBlue ® L Series Adhesive Melters<br />

DuraBlue 4L System Selection<br />

DuraBlue 4L Systems have a pump rate of 22 kg/hr (48 lb/hr), operate at 600 psi hydraulic pressure, <strong>and</strong> process<br />

adhesive with viscosity up to10,000 cps. Filters are not used with these units. The table below shows the system<br />

unit numbers according to available voltage <strong>and</strong> hose/applicator combination.<br />

Description<br />

120V 1Ø 200V 1Ø 240V 1Ø<br />

60 Hz 50/60 Hz 50/60 Hz<br />

L6 H<strong>and</strong>-held Applicator, Extrusion<br />

L6 H<strong>and</strong>-Held Applicator/Hose Assembly, 1.5 m (6 Ft) — — 1030231<br />

L6 H<strong>and</strong>-Held Applicator/Hose Assembly, 3 m (10 Ft) 1031137 — 1030230<br />

AD-41 H<strong>and</strong>-held Applicator, Extrusion (DuraBraid hose)<br />

Ad-41 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 2.4 m (8 Ft), 1mm (0.04 In.) 1030162 1031165 1030210<br />

Ad-41 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 3.6 m (12 Ft), 1mm (0.04 In.) 1030163 1031166 1030211<br />

Ad-41 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 4.8 m (16 Ft), 1mm (0.04 In.) 1030164 1031167 1030212<br />

AD-41 H<strong>and</strong>-held Applicator, Swirl Adapter <strong>and</strong> Air Control Kit (DuraBraid hose)<br />

AD-41 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 2.4 m (8 ft), 1mm (0.04 in.) wide<br />

pattern CF<br />

1030165 1031168 1030213<br />

AD-41 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 3.6 m (12 Ft), 1mm (0.04 In.)<br />

Wide Pattern Cf<br />

1030166 1031169 1030214<br />

AD-41 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 4.8 m (16 ft), 1mm (0.04 in.)<br />

wide pattern CF<br />

1030167 1031170 1030215<br />

AD-31 H<strong>and</strong>-held Applicator, Extrusion (DuraBraid hose)<br />

AD-31 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 2.4 m (8 ft),<br />

1.5 mm (0.06 in.) extended<br />

1040160 1044264 1044261<br />

AD-31 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 3.6 m (12 ft),<br />

1.5 mm (0.06 in.) extended<br />

1041161 1044265 1044262<br />

AD-31 H<strong>and</strong>-held Applicator/Hp Hose Assembly, 4.8 m (16 ft),<br />

1.5 mm (0.06 in.) extended<br />

1040162 1044266 1044263<br />

Non-Coated Tank, AD-31 H<strong>and</strong>-held Applicator, Extrusion (DuraBraid hose)<br />

AD-31 H<strong>and</strong>-held Applicator/Hose Assembly, 2.4 m (8 ft),<br />

1.5 mm (0.06 in.) extended<br />

1042781 — —<br />

AD-31 H<strong>and</strong>-held Applicator/Hose Assembly, 3.6 m (12 ft),<br />

1.5 mm (0.06 in.) extended<br />

1042782 — —<br />

AD-31 H<strong>and</strong>-held Applicator/Hose Assembly, 4.8 m (16 ft),<br />

1.5 mm (0.06 in.) extended<br />

1042783 — —<br />

NOTES:<br />

All 120V DuraBlue 4 L Systems include a power cord.<br />

All 200V <strong>and</strong> 240V systems include a power cord without a plug. Wire colors follow international st<strong>and</strong>ards.<br />

Check total external wattage limitation before adding second h<strong>and</strong>-held applicator/hose assembly to DuraBlue 4L 120V units.<br />

The pump rate listed is for 60 Hz power supply. The pump rate at 50 HZ is lower <strong>and</strong> equal to 83% of the value shown. Processing<br />

adhesives with viscosities higher than the stated limit may reduce melter performance.<br />

To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.<br />

International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!