2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Automatic Applicators | 7-7
Best Choice Configurable Applicators
SolidBlue S
(SLBS)
Applicator Type Features Application/Usage
• SolidBlue S standard module, springtension
adjustable (not stroke-adjustable)
• Air-open, spring-close (AO/SC) operation
• Accommodates Saturn single-orifice
and right-angle nozzles
SolidBlue S applicators provide longer life
than ClassicBlue applicators and deliver
exceptional adhesive cut-off/ minimum-drip
operation for medium-to-high speed applications.
SolidBlue A
(SLBA)
• SolidBlue A standard module, nonadjustable
• Air-open, air-close (AO/AC) operation
• Factory installed Saturn solenoid valve
• Accommodates Saturn single-orifice
and right-angle nozzles
SolidBlue A applicators provide better cutoff
than SolidBlue S applicators (because of
the air-open, air-close operation), provide
extended service life beyond ClassicBlue
applicators, and deliver exceptional accuracy
for demanding applications. SolidBlue
A applicators are recommended for use with
adhesives that have a viscosity greater than
1,250 cps and cycle rates below 15 ms.
SureBead S
(SURS)
SureBead A
(SURA)
• High quality patterns with virtually
clog-free operation, even when using
“difficult to machine” low and medium
viscosity adhesives
• Maximum bead deposition capability
• Air-open, spring-close (SureBead S)
or air-open, air-close (SureBead A)
operation
• Colored ring on the removable nozzle
easily identifies orifice size
• Nozzles are interchangeable - change
orifice sizes without removing the module
from the applicator
• Nozzle tip is maintained resulting in
cleanly applied beads and better product
seals
SureBead modular hot melt applicators
are designed for easy flushing by removing
the nozzle from the module. Nozzles used
with a SureBead applicator are designed
to perform similar in function to reduced
cavity and zero cavity nozzles. SureBead
applicators are designed to dispense
packaging grade adhesives.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com