2018 Adhesives and Sealants Equipment Guide

More documents

Recommendations

Info

3-14 | Bulk Melters DuraDrum ® Bulk Melter Specifications Type of system Parameter Specification Gear pumps with fixed speed AC motor Drum diameter mm (in.) 571 or 567 (22.5 or 22.3) Maximum pump rate( 1 ) kg/hr (lb/hr) 245 (450) Number of Hose/Applicator Pairs Maximum working hydraulic pressure Operating temperature range Ambient temperature range Temperature control stability Temperature sensor 2 (hydraulic & electrical) 2 additional (electrical only) 100 bar (1500 psi) 40-230°C (100-450°F) -5 to 50°C (23 to 122°F) ± 1°C (2°F) Ni-120 200 VAC 3Ø delta 50/60 Hz 240 VAC 3Ø delta 50/60 Hz 400 VAC 3Ø Y 50/60 Hz Electrical service( 2 ) 400 VAC 3Ø delta 50/60 Hz 480 VAC 3Ø delta 50/60 Hz 575 VAC 3Ø delta 50/60 Hz Maximum system power capacity 33,100 watts Weight( 3 ) kg (lb) (empty) 675 (1488) 3 STD Outputs - programmable for function Input/Output capability 4 STD Inputs - programmable for function Protection IP54 (1) Actual rates will vary depending on adhesive type, application parameters and input voltage. (2) Permitted deviation from rated line voltage is ±10%. (3) Weight depends on melter configuration. To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com. International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Adhesive & Sealants Equipment Guide Bulk Melters | 3-15 DuraDrum ® Bulk Melter Dimensions Product dimensions • Width (W) • Height (H) • Depth (D) Dimensions mm (in.) Installation (service) dimensions • Width • Height • Depth DuraDrum 1570 mm (61.8 in.) 3010 mm (118.5 in.) 740 mm (29.1 in.) 2100 mm (82.7 in.) 3010 mm (118.5 in.) 1105 mm (343.5 in.) 3010 1570 To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com. International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Page 1 and 2:
Adhesives & Sealants Guide 2018-201
Page 3:
Purpose Using the Guide The Adhesiv
Page 6 and 7:
ii | Table of Contents Table of Con
Page 8 and 9:
iv | Table of Contents Table of Con
Page 10 and 11:
vi | Table of Contents Table of Con
Page 12 and 13:
viii | Table of Contents Table of C
Page 14 and 15:
x | Table of Contents Table of Cont
Page 16 and 17:
xii | Table of Contents Table of Co
Page 18 and 19:
xiv | Table of Contents Table of Co
Page 20 and 21:
xvi | Table of Contents Table of Co
Page 22 and 23:
xviii | Table of Contents Table of
Page 24 and 25:
xx | Table of Contents Table of Con
Page 26 and 27:
xxii | Table of Contents Table of C
Page 28 and 29:
1-2 | Melters Freedom ® Hot Melt A
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
1-10 | Melters Freedom ® Hot Melt
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
1-16 | Melters ProBlue Liberty Inte
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
1-22 | Melters ProBlue ® Series Me
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
1-34 | Melters ATS Retrofit Kit Ext
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
1-42 | Melters Fulfill ® Retrofit
Page 70 and 71:
1-44 | Melters Fulfill ® Retrofit
Page 72 and 73:
1-46 | Melters AltaBlue TT Adhesive
Page 74 and 75:
1-48 | Melters AltaBlue TT Adhesive
Page 76 and 77:
1-50 | Melters AltaBlue Touch Serie
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
1-56 | Melters DuraBlue ® L Series
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
1-62 | Melters DuraBlue ® Large Ca
Page 90 and 91:
1-64 | Melters DuraBlue ® Large Ca
Page 92 and 93:
1-66 | Melters VersaBlue ® Plus Se
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
1-72 | Melters VersaBlue ® Adhesiv
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
1-78 | Melters VersaBlue ® N Adhes
Page 106 and 107: 1-80 | Melters VersaBlue ® N Adhes
Page 108 and 109: 1-82 | Melters VersaBlue ® N Adhes
Page 110 and 111: 1-84 | Melters VersaBlue ® XN and
Page 120 and 121: 1-94 | Melters VersaBlue ® N, XN,
Page 122 and 123: 1-96 | Melters EZ Melt Series Adhes
Page 124 and 125: 1-98 | Melters EZ Melt Series Adhes
Page 126 and 127: 2-2 | Foam Systems SureFoam Dispen
Page 128 and 129: 2-4 || Foam Systems Ultra FoamMix
Page 130 and 131: 2-6 | Foam Systems Ultra FoamMix C
Page 132 and 133: 2-8 | Foam Systems Ultra FoamMix E
Page 134 and 135: 2-10 | Foam Systems Ultra FoamMix
Page 140 and 141: 2-16 | Foam Systems FoamMelt ® Pro
Page 142 and 143: 2-18 | Foam Systems FoamMelt ® Pro
Page 144 and 145: 3-2 | Bulk Melters VersaDrum ® 200
Page 150 and 151: 3-8 | Bulk Melters VersaPail ® 20-
Page 152 and 153: 3-10 | Bulk Melters VersaPail ® 20
Page 154 and 155: 3-12 | Bulk Melters VersaPail ® 20
Page 158 and 159: 3-16 | Bulk Melters DuraDrum ® Bul
Page 160 and 161: 3-18 | Bulk Melters DuraDrum ® Bul
Page 162 and 163: 3-20 | Bulk Melters DuraPail ® Bul
Page 168 and 169: 4-2 | PUR Melters PURBlue 4 Adhesiv
Page 170 and 171: 4-4 | PUR Melters PURBlue 4 Adhesiv
Page 172 and 173: 4-6 | PUR Melters VersaPUR Slug Mel
Page 174 and 175: 4-8 | PUR Melters VersaPUR Slug Mel
Page 176 and 177: 4-10 | PUR Melters VersaPUR Slug Me
Page 178 and 179: 4-12 | PUR Melters VersaPUR Tank Me
Page 184 and 185: 4-18 | PUR Melters MiniPUR Plus Pol
Page 186 and 187: 4-20 | PUR Melters MiniPUR Plus Pol
Page 188 and 189: 5-2 | Automated Dispensing Systems
Page 206 and 207:
6-2 | Extruder Systems EX Extruder
Page 208 and 209:
6-4 | Extruder Systems EEX Extruder
Page 210 and 211:
6-6 | Extruder Systems EEX Extruder
Page 212 and 213:
7-2 | Automatic Applicators Best Ch
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
7-10 | Automatic Applicators SolidB
Page 222 and 223:
7-12 | Automatic Applicators SolidB
Page 224 and 225:
7-14 | Automatic Applicators SureBe
Page 226 and 227:
7-16 | Automatic Applicators SureBe
Page 228 and 229:
7-18 | Automatic Applicators Select
Page 230 and 231:
7-20 | Automatic Applicators Select
Page 232 and 233:
7-22 | Automatic Applicators MiniBl
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
7-36 | Automatic Applicators EcoBea
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
7-46 | Automatic Applicators Patter
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
7-52 | Automatic Applicators Series
Page 264 and 265:
Page 266 and 267:
7-48 | Automatic Applicators AG-900
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
7-54 | Automatic Applicators e.dot+
Page 274 and 275:
7-56 | Automatic Applicators e.dot+
Page 276 and 277:
7-58 | Automatic Applicators E-400
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
7-64 | Automatic Applicators SureSe
Page 284 and 285:
7-66 | Automatic Applicators SureSe
Page 286 and 287:
8-2 | Non-Contact Universal Applica
Page 288 and 289:
8-4 | Non-Contact AltaSpray Plus Ap
Page 290 and 291:
8-6 | Non-Contact AltaSpray Plus Ap
Page 292 and 293:
8-8 | Non-Contact Non-Contact Adhes
Page 294 and 295:
8-10 | Non-Contact Non-Contact Adhe
Page 296 and 297:
8-12 | Non-Contact Non-Contact Adhe
Page 298 and 299:
8-14 | Non-Contact Spray Nozzles Co
Page 300 and 301:
Page 302 and 303:
8-18 | Non-Contact Spray Nozzles Un
Page 304 and 305:
8-20 | Non-Contact Spray Nozzles Su
Page 306 and 307:
8-22 | Non-Contact Spray Nozzles Si
Page 308 and 309:
8-24 | Non-Contact Spray Nozzles Si
Page 310 and 311:
8-26 | Non-Contact SureWrap ® Nozz
Page 312 and 313:
Page 314 and 315:
8-30 | Non-Contact Process Air Cont
Page 316 and 317:
9-2 | Hand-Held Applicators Series
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
9-12 | Hand-Held Applicators AD-31
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
9-20 | Hand-Held Applicators Select
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
10-2 | Coating Heads Speed-Coat ®
Page 346 and 347:
10-4 | Coating Heads Speed-Coat ®
Page 348 and 349:
10-6 | Coating Heads TrueCoat ® Sl
Page 350 and 351:
10-8 | Coating Heads TrueCoat ® Sl
Page 352 and 353:
10-10 | Coating Heads TrueCoat ® F
Page 354 and 355:
10-12 | Coating Heads TrueCoat ® F
Page 356 and 357:
10-14 | Coating Heads EZ Coat Slot
Page 358 and 359:
10-16 | Coating Heads EZ Coat Slot
Page 360 and 361:
10-18 | Coating Heads AltaSlot Appl
Page 362 and 363:
10-20 | Coating Heads AltaSlot Appl
Page 364 and 365:
10-22 | Coating Heads EB 60 Flex Ed
Page 366 and 367:
10-24 | Coating Heads EB 60 Flex Ed
Page 368 and 369:
10-26 | Coating Heads EP 48 PRO Boo
Page 370 and 371:
10-28 | Coating Heads EP 48 PRO Boo
Page 372 and 373:
11-2 | Nozzles Precision Bead Nozzl
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
11-10 | Nozzles Precision Bead Nozz
Page 382 and 383:
11-12 | Nozzles Specialty Nozzles N
Page 384 and 385:
11-14 | Nozzles Specialty Nozzles B
Page 386 and 387:
11-16 | Nozzles Specialty Nozzles T
Page 388 and 389:
11-18 | Nozzles Nozzle Accessories
Page 390 and 391:
11-20 | Nozzles Pattern Width Graph
Page 392 and 393:
12-2 | Hoses Advanced Technology Ho
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
12-10 | Hoses Advanced Technology H
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
13-2 | Controls Spectra 30 Control
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
13-10 | Controls Concert Series Con
Page 420 and 421:
13-12 | Controls Concert Series Con
Page 422 and 423:
13-14 | Controls LogiComm ® Contro
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
13-26 | Controls LA 404-2 Pattern C
Page 436 and 437:
13-28 | Controls LA 404-2 Pattern C
Page 438 and 439:
13-30 | Controls Seal Sentry ® Ser
Page 440 and 441:
13-32 | Controls Accubar Barcode Ve
Page 442 and 443:
13-34 | Controls Accubar Barcode Ve
Page 444 and 445:
13-36 | Controls Applicator Driver
Page 446 and 447:
13-38 | Controls LogiComm ® Applic
Page 448 and 449:
13-40 | Controls LogiComm ® Applic
Page 450 and 451:
13-42 | Controls LogiComm ® OEM Ap
Page 452 and 453:
13-44 | Controls LogiComm ® OEM Ap
Page 454 and 455:
13-46 | Controls e driver Specifica
Page 456 and 457:
14-2 | Auxiliary Equipment Nitrogen
Page 458 and 459:
14-4 | Auxiliary Equipment Nitrogen
Page 460 and 461:
14-6 | Auxiliary Equipment ProMeter
Page 462 and 463:
14-8 | Auxiliary Equipment ProMeter
Page 464 and 465:
14-10 | Auxiliary Equipment VDK Mid
Page 466 and 467:
14-12 | Auxiliary Equipment VDK Met
Page 468 and 469:
14-14 | Auxiliary Equipment PS Mete
Page 470 and 471:
14-16 | Auxiliary Equipment PS Mete
Page 472 and 473:
15-2 | Liquid Adhesive Equipment LA
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
15-10 | Liquid Adhesive Equipment L
Page 482 and 483:
15-12 | Liquid Adhesive Equipment P
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
15-18 | Liquid Adhesive Equipment W
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
15-52 | Liquid Adhesive Equipment H
Page 524 and 525:
16-2 | Accessories In-Line Filters
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
16-8 | Accessories Solenoid Valves
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
16-14 | Accessories Fittings and Co
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
16-22 | Accessories Hydraulic Syste
Page 546 and 547:
16-24 | Accessories Multi-Service D
Page 548 and 549:
17-2 | Technical Data Conversion Fo
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556:
17-10 | Technical Data Conversion F
show all

2018 Adhesives and Sealants Equipment Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?