2018 Adhesives and Sealants Equipment Guide

7-6 | Automatic Applicators
Best Choice Configurable Applicators
Module Selection Chart (contd)
Module Type Characteristics Application/Usage
ClassicBlue
zero cavity (ZC) and
zero cavity case
sealing (ZCS)
Zero Cavity
Extended (ZE)
• ClassicBlue zero cavity module with
micro-adjuster
• Air-open, spring-close (AO/SC)
operation
• Available in six orifice sizes
Use ClassicBlue zero cavity applicators
in critical applications that require
consistent no-clog/no-drip operation,
precise bead placement, and extrusion
control. The close-tolerance, matched
nozzle-and-needle assembly eliminates
the formation of minute adhesive
pockets that can lead to nozzle
clogging, drool, and adhesive stringing.
The movement of the needle within the
nozzle creates a self-cleaning action,
minimizing blockages and reducing
maintenance. Applications for these
applicators include case sealing, cap
lining, nonwovens side seaming and
elastic attachment, bonding, and gasketing.
Zero cavity applicators feature a
patented micro-adjust module. A
micrometer adjustment screw at the
top of the module can reduce adhesive
flow by up to 30 percent. Additionally,
minor variations in bead position can be
achieved via a load adjustment mechanism.
These adjustments are especially
beneficial in high-speed, multi-module
applicator applications.
Continued...
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com