2018 Adhesives and Sealants Equipment Guide

15-18 | Liquid Adhesive Equipment
WM 801 Series Electric Applicators
Specifications
Parameter
Working hydraulic pressure MPa (psi)
Hydraulic hose connection
Specification
4.8 (700) maximum
1/2-20 UNF
Minimum cycle time (1) ms 3.0
Nozzle diameter range (2) :
Contact mm (in.)
0.3–1.0 (0.012–0.039)
Non-contact mm (in.) 0.3–0.7 (0.012–0.028)
45 x 34 (1.77 x 1.34)
Pattern plate sizes (2)(3) mm (in.)
45 x 45 (1.77 x 1.77)
45 x 60 (1.77 x 2.36)
0.5 (0.020)
Pattern plate hole diameters mm (in.)
0.7 (0.028)
1.0 (0.039)
Electrical service (4)
Weight kg (lb)
Peak current 1.8 A, holding current 0.4 A
(1)
Cycle time based on an adhesive viscosity of 800 cps. Actual cycle time will vary depending on adhesive viscosity and characteristics.
(2)
Specify and purchase nozzles and pattern plates separately.
(3)
Pattern plates are a configurable product. Widths shown represent standard sizes only; custom sizes are available to meet specific
application parameters.
(4)
Use with Nordson applicator driver products.
Selection Chart
Part Number Description Comment
7301316 Applicator, WM801-Q without nozzle
7301317 Applicator, WM801-S, + Slide Plate 34 mm with slide plate (no pattern plate included)
7302932 Applicator, WM801-S, + Slide Plate 45 mm with slide plate (no pattern plate included)
7300104 WM801-S, Upgrade Kit (retrofit) Upgrade WM801-Q or WM801-P to WM801-S
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com