2018 Adhesives and Sealants Equipment Guide

More documents

Recommendations

Info

4-18 | PUR Melters MiniPUR Plus Polyurethane Melter System Specifications Type of System Holding Capacity Throughput (per hour) 1 Melt Rate (per hour) 1 Parameter Maximum Pump Rate (per hour) 2 Specification Tank with gerotor pump 4 L (244 in 3 ) 3.9 kg (8.6 lb) 6.3 kg (13.9 lb) 4 kg (8.8 lb) 35 kg (77 lb) or 50 kg (110 lb) Number of Hoses/Applicators (per hour) 3 up to 2 Maximum Working Hydraulic Pressure Operating Temperature Range Ambient Temperature Range Temperature Control Stability Gas Pressure for Nitrogen Blanket Electrical Service 4 Maximum System Power Capacity @ 240 VAC Approx. Melter Weight (empty) 5 Melter Dimensions: • Width • Height • Depth 75 bars (1100 psi) 40 to 180°C (100 to 356°F) 0 to 50°C (32 to 122°F) ± 0.5°C (1°F) 0.2 bars (29 psi) 120 VAC single phase 60 Hz 200 to 240 VAC single phase 50/60 Hz 3355 watts 43 kg (95 lbs) 334 mm (13.1 in.) 560 mm (22.04 in.) 652 mm (25.66 in.) 1 Actual rates will vary depending on adhesive type, application parameters and input voltage. 2 Values shown for melter @ 60 Hz. 3 Permitted deviation from rated line voltage is ± 10%. To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com. International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Adhesive & Sealants Equipment Guide PUR Melters | 4-19 MiniPUR Plus Polyurethane Melter System Part Numbers MiniPUR Plus Melters Pump Size (cc/rev) Pump Rate (kg/hr) 0.3 1.4 0.62 2.8 1.86 8.5 7.73 35 I/O Board Included? Part Number Description No 7407559 Melter,MiniPUR, Plus,240V,2H/G,1.4Kg/H Yes 7407560 Melter,MiniPUR, Plus,240V,2H/G,1.4Kg,I/O No 7407561 Melter,MiniPUR, Plus,240V,2H/G,2.8Kg/H Yes 7407562 Melter,MiniPUR, Plus,240V,2H/G,2.8Kg,I/O No 7407563 Melter,MiniPUR, Plus,240V,2H/G,8.5Kg/H Yes 7407564 Melter,MiniPUR, Plus,240V,2H/G,8.5Kg,I/O No 7407565 Melter,MiniPUR, Plus,240V,2H/G,35Kg/H Yes 7407566 Melter,MiniPUR, Plus,240V,2H/G,35Kg,I/O 50 Yes 7407567 Melter,MiniPUR, Plus,240V,2H/G,50Kg,I/O NOTE: All AD-41 Hand-held applicators include a 1 mm (0.04”) oriface diameter nozzle. MiniPUR Accessories Part Number 120V Hand-held Applicator/Hose Assemblies* Description 1030220 AD-41 Hand-held Applicator/HP Hose Assembly, 2.4 m (8 ft), 1 mm (0.04”) oriface diameter nozzle 1030221 AD-41 Hand-held Applicator/HP Hose Assembly, 3.6 m (12 ft), 1 mm (0.04”) oriface diameter nozzle 1030222 AD-41 Hand-held Applicator/HP Hose Assembly, 4.8 m (16 ft), 1 mm (0.04”) oriface diameter nozzle 240V Hand-held Applicator/Hose Assemblies 1030225 AD-41 Hand-held Applicator/HP Hose Assembly, 2.4 m (8 ft), 1 mm (0.04”) oriface diameter nozzle 1030226 AD-41 Hand-held Applicator/HP Hose Assembly, 3.6 m (12 ft), 1 mm (0.04”) oriface diameter nozzle 1030227 AD-41 Hand-held Applicator/HP Hose Assembly, 4.8 m (16 ft), 1 mm (0.04”) oriface diameter nozzle *Check total external wattage limitation before adding second hand-held applicator/hose assembly to MiniPUR 120V systems. See 120V Blue series hand-held applicator/hose tree for details. Nitrogen Accessories Part Number Description 1106554 Nitrogen Generator 1108292 Kit, Regulator, Nitrogen Blanket, 10 psi, w/timer (used with nitrogen generator) 1108290 Kit, Regulator, Low Pressure 3000-10-0 psi, w/timer (used with 3000 psi bottle) 1108291 Kit, Regulator, High Pressure 6000-10-0 psi, w/timer (used with 6000 psi bottle) To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com. International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com
Page 1 and 2:
Adhesives & Sealants Guide 2018-201
Page 3:
Purpose Using the Guide The Adhesiv
Page 6 and 7:
ii | Table of Contents Table of Con
Page 8 and 9:
iv | Table of Contents Table of Con
Page 10 and 11:
vi | Table of Contents Table of Con
Page 12 and 13:
viii | Table of Contents Table of C
Page 14 and 15:
x | Table of Contents Table of Cont
Page 16 and 17:
xii | Table of Contents Table of Co
Page 18 and 19:
xiv | Table of Contents Table of Co
Page 20 and 21:
xvi | Table of Contents Table of Co
Page 22 and 23:
xviii | Table of Contents Table of
Page 24 and 25:
xx | Table of Contents Table of Con
Page 26 and 27:
xxii | Table of Contents Table of C
Page 28 and 29:
1-2 | Melters Freedom ® Hot Melt A
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
1-10 | Melters Freedom ® Hot Melt
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
1-16 | Melters ProBlue Liberty Inte
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
1-22 | Melters ProBlue ® Series Me
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
1-34 | Melters ATS Retrofit Kit Ext
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
1-42 | Melters Fulfill ® Retrofit
Page 70 and 71:
1-44 | Melters Fulfill ® Retrofit
Page 72 and 73:
1-46 | Melters AltaBlue TT Adhesive
Page 74 and 75:
1-48 | Melters AltaBlue TT Adhesive
Page 76 and 77:
1-50 | Melters AltaBlue Touch Serie
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
1-56 | Melters DuraBlue ® L Series
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
1-62 | Melters DuraBlue ® Large Ca
Page 90 and 91:
1-64 | Melters DuraBlue ® Large Ca
Page 92 and 93:
1-66 | Melters VersaBlue ® Plus Se
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
1-72 | Melters VersaBlue ® Adhesiv
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
1-78 | Melters VersaBlue ® N Adhes
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
1-84 | Melters VersaBlue ® XN and
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
1-94 | Melters VersaBlue ® N, XN,
Page 122 and 123:
1-96 | Melters EZ Melt Series Adhes
Page 124 and 125:
1-98 | Melters EZ Melt Series Adhes
Page 126 and 127:
2-2 | Foam Systems SureFoam Dispen
Page 128 and 129:
2-4 || Foam Systems Ultra FoamMix
Page 130 and 131:
2-6 | Foam Systems Ultra FoamMix C
Page 132 and 133:
2-8 | Foam Systems Ultra FoamMix E
Page 134 and 135: 2-10 | Foam Systems Ultra FoamMix
Page 140 and 141: 2-16 | Foam Systems FoamMelt ® Pro
Page 142 and 143: 2-18 | Foam Systems FoamMelt ® Pro
Page 144 and 145: 3-2 | Bulk Melters VersaDrum ® 200
Page 150 and 151: 3-8 | Bulk Melters VersaPail ® 20-
Page 152 and 153: 3-10 | Bulk Melters VersaPail ® 20
Page 154 and 155: 3-12 | Bulk Melters VersaPail ® 20
Page 156 and 157: 3-14 | Bulk Melters DuraDrum ® Bul
Page 162 and 163: 3-20 | Bulk Melters DuraPail ® Bul
Page 168 and 169: 4-2 | PUR Melters PURBlue 4 Adhesiv
Page 170 and 171: 4-4 | PUR Melters PURBlue 4 Adhesiv
Page 172 and 173: 4-6 | PUR Melters VersaPUR Slug Mel
Page 174 and 175: 4-8 | PUR Melters VersaPUR Slug Mel
Page 176 and 177: 4-10 | PUR Melters VersaPUR Slug Me
Page 178 and 179: 4-12 | PUR Melters VersaPUR Tank Me
Page 186 and 187: 4-20 | PUR Melters MiniPUR Plus Pol
Page 188 and 189: 5-2 | Automated Dispensing Systems
Page 206 and 207: 6-2 | Extruder Systems EX Extruder
Page 208 and 209: 6-4 | Extruder Systems EEX Extruder
Page 210 and 211: 6-6 | Extruder Systems EEX Extruder
Page 212 and 213: 7-2 | Automatic Applicators Best Ch
Page 220 and 221: 7-10 | Automatic Applicators SolidB
Page 222 and 223: 7-12 | Automatic Applicators SolidB
Page 224 and 225: 7-14 | Automatic Applicators SureBe
Page 226 and 227: 7-16 | Automatic Applicators SureBe
Page 228 and 229: 7-18 | Automatic Applicators Select
Page 230 and 231: 7-20 | Automatic Applicators Select
Page 232 and 233: 7-22 | Automatic Applicators MiniBl
Page 234 and 235:
7-24 | Automatic Applicators MiniBl
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
7-36 | Automatic Applicators EcoBea
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
7-46 | Automatic Applicators Patter
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
7-52 | Automatic Applicators Series
Page 264 and 265:
Page 266 and 267:
7-48 | Automatic Applicators AG-900
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
7-54 | Automatic Applicators e.dot+
Page 274 and 275:
7-56 | Automatic Applicators e.dot+
Page 276 and 277:
7-58 | Automatic Applicators E-400
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
7-64 | Automatic Applicators SureSe
Page 284 and 285:
7-66 | Automatic Applicators SureSe
Page 286 and 287:
8-2 | Non-Contact Universal Applica
Page 288 and 289:
8-4 | Non-Contact AltaSpray Plus Ap
Page 290 and 291:
8-6 | Non-Contact AltaSpray Plus Ap
Page 292 and 293:
8-8 | Non-Contact Non-Contact Adhes
Page 294 and 295:
8-10 | Non-Contact Non-Contact Adhe
Page 296 and 297:
8-12 | Non-Contact Non-Contact Adhe
Page 298 and 299:
8-14 | Non-Contact Spray Nozzles Co
Page 300 and 301:
Page 302 and 303:
8-18 | Non-Contact Spray Nozzles Un
Page 304 and 305:
8-20 | Non-Contact Spray Nozzles Su
Page 306 and 307:
8-22 | Non-Contact Spray Nozzles Si
Page 308 and 309:
8-24 | Non-Contact Spray Nozzles Si
Page 310 and 311:
8-26 | Non-Contact SureWrap ® Nozz
Page 312 and 313:
Page 314 and 315:
8-30 | Non-Contact Process Air Cont
Page 316 and 317:
9-2 | Hand-Held Applicators Series
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
9-12 | Hand-Held Applicators AD-31
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
9-20 | Hand-Held Applicators Select
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
10-2 | Coating Heads Speed-Coat ®
Page 346 and 347:
10-4 | Coating Heads Speed-Coat ®
Page 348 and 349:
10-6 | Coating Heads TrueCoat ® Sl
Page 350 and 351:
10-8 | Coating Heads TrueCoat ® Sl
Page 352 and 353:
10-10 | Coating Heads TrueCoat ® F
Page 354 and 355:
10-12 | Coating Heads TrueCoat ® F
Page 356 and 357:
10-14 | Coating Heads EZ Coat Slot
Page 358 and 359:
10-16 | Coating Heads EZ Coat Slot
Page 360 and 361:
10-18 | Coating Heads AltaSlot Appl
Page 362 and 363:
10-20 | Coating Heads AltaSlot Appl
Page 364 and 365:
10-22 | Coating Heads EB 60 Flex Ed
Page 366 and 367:
10-24 | Coating Heads EB 60 Flex Ed
Page 368 and 369:
10-26 | Coating Heads EP 48 PRO Boo
Page 370 and 371:
10-28 | Coating Heads EP 48 PRO Boo
Page 372 and 373:
11-2 | Nozzles Precision Bead Nozzl
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
11-10 | Nozzles Precision Bead Nozz
Page 382 and 383:
11-12 | Nozzles Specialty Nozzles N
Page 384 and 385:
11-14 | Nozzles Specialty Nozzles B
Page 386 and 387:
11-16 | Nozzles Specialty Nozzles T
Page 388 and 389:
11-18 | Nozzles Nozzle Accessories
Page 390 and 391:
11-20 | Nozzles Pattern Width Graph
Page 392 and 393:
12-2 | Hoses Advanced Technology Ho
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
12-10 | Hoses Advanced Technology H
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
13-2 | Controls Spectra 30 Control
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
13-10 | Controls Concert Series Con
Page 420 and 421:
13-12 | Controls Concert Series Con
Page 422 and 423:
13-14 | Controls LogiComm ® Contro
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
13-26 | Controls LA 404-2 Pattern C
Page 436 and 437:
13-28 | Controls LA 404-2 Pattern C
Page 438 and 439:
13-30 | Controls Seal Sentry ® Ser
Page 440 and 441:
13-32 | Controls Accubar Barcode Ve
Page 442 and 443:
13-34 | Controls Accubar Barcode Ve
Page 444 and 445:
13-36 | Controls Applicator Driver
Page 446 and 447:
13-38 | Controls LogiComm ® Applic
Page 448 and 449:
13-40 | Controls LogiComm ® Applic
Page 450 and 451:
13-42 | Controls LogiComm ® OEM Ap
Page 452 and 453:
13-44 | Controls LogiComm ® OEM Ap
Page 454 and 455:
13-46 | Controls e driver Specifica
Page 456 and 457:
14-2 | Auxiliary Equipment Nitrogen
Page 458 and 459:
14-4 | Auxiliary Equipment Nitrogen
Page 460 and 461:
14-6 | Auxiliary Equipment ProMeter
Page 462 and 463:
14-8 | Auxiliary Equipment ProMeter
Page 464 and 465:
14-10 | Auxiliary Equipment VDK Mid
Page 466 and 467:
14-12 | Auxiliary Equipment VDK Met
Page 468 and 469:
14-14 | Auxiliary Equipment PS Mete
Page 470 and 471:
14-16 | Auxiliary Equipment PS Mete
Page 472 and 473:
15-2 | Liquid Adhesive Equipment LA
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
15-10 | Liquid Adhesive Equipment L
Page 482 and 483:
15-12 | Liquid Adhesive Equipment P
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
15-18 | Liquid Adhesive Equipment W
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
15-52 | Liquid Adhesive Equipment H
Page 524 and 525:
16-2 | Accessories In-Line Filters
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
16-8 | Accessories Solenoid Valves
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
16-14 | Accessories Fittings and Co
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
16-22 | Accessories Hydraulic Syste
Page 546 and 547:
16-24 | Accessories Multi-Service D
Page 548 and 549:
17-2 | Technical Data Conversion Fo
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556:
17-10 | Technical Data Conversion F
show all

2018 Adhesives and Sealants Equipment Guide

Create successful ePaper yourself

Delete template?

Save as template?