2018 Adhesives and Sealants Equipment Guide

Liquid Adhesive Equipment
Adhesive & Sealants Equipment Guide
Web Content
Liquid Adhesive Equipment | 15-1
LA 300 Series Piston Pumps
Description
Nordson LA 300 dual-acting piston pumps offer
flexibility and consistent high-flow rates of liquid
adhesives in paper converting industries such as folding
carton, envelope or bag & sack manufacturing.
The filter housing can be rotated around the air motor
body, which allows flexible mounting. Further, the filter
housing can be moved close to the applicator area by
means of an extra wide high pressure hose. Additionally,
the LA38x pressure regulators do not need a drain pipe.
This allows you to move the regulator and the filter
housing close to the applicator area to prevent pressure
drops.
Wall-mount, lid-mount and system-trolley
configurations are available to meet specific installation
requirements.
A 7:1 air-to-fluid ratio delivers precise application when
paired with LA 38X pressure regulators. High flow rates
allow use of lower pressure, reducing risk of adhesive
shearing. Higher flow capability also reduces the need to
use multiple pumps in high flow applications.
LA 300 pumps accommodate 20, 30 and 200 liter (5 or
55 gallon) containers. The versatile systems offer both
standard and wear-resistant rods to handle a wide range
of adhesive and production needs. The pump seals and
lubricating oil are US FDA approved, making them
acceptable for use in food and tobacco industries.
LA 300 Piston Pump
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com