2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Melters | 1-55
Web Content
DuraBlue ® L Series Adhesive Melters
Description
Nordson DuraBlue melters feature fixed-speed AC
motors with gerotor gear pumps for easy-to-operate,
low-maintenance hot melt adhesive application. A
PTFE coated tube tank eliminates dead corners and
minimizes adhesive char. The versatile control panel
offers a choice of programming methods using either
a keypad or arrow keys.
Features
• Pump operation can be controlled by a hand-held
applicator or a footswitch.
• Large accessible tank opening allows easier filling and
cleaner operation.
• Status-at-a-glance indicators highlight: ready, fault, service
and temperature status for tank, hose and applicator.
• Simplified intuitive controls and service indicators require
less user training and simplify maintenance scheduling.
• Quick-disconnect style plugs and pneumatic hose/
applicator fittings provide quick and easy hook-up of
components.
• Disposable filter eliminates routine filter flushing. All
major components are easily accessible from the front of
the melter, and all major subsystems are easily replaced.
• Easy-to-remove exterior panels provide quick and simple
maintenance.
• PTFE-coated tanks reduce char buildup and minimize
clean up.
DuraBlue 4 L System
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com