Das Qdecoder Handbuch
Das Qdecoder Handbuch
Das Qdecoder Handbuch
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Signal <br />
Ampel <br />
Licht <br />
Belgian light signals offer<br />
pure speed signalling; route<br />
information is not presented.<br />
Speeds are presented by<br />
illuminated fi gures or by<br />
signs on the signals.<br />
Controlling HigH SignalS<br />
Main Signal<br />
<strong>Qdecoder</strong>s offer modes<br />
for both fl ashing and non<br />
fl ashing signals in four<br />
confi gurations described in<br />
© Henckens seinen<br />
the table below. The upper<br />
part shows the signal background. In the<br />
lower one the aspects are shown that a<br />
control command will activate.<br />
The accessory address of the signal Asignal is written to the address confi guration<br />
variable relating to the fi rst function<br />
output the signal is connected to. Up to<br />
three addresses (A , A +1 and A +2)<br />
signal signal signal<br />
are used for switching of signal aspects.<br />
mode<br />
normal<br />
contre<br />
voie<br />
voie<br />
signal<br />
signal<br />
Basis base class<br />
normal<br />
Standard standard contre<br />
class<br />
voie<br />
Alleskönner all-in-one voie<br />
class<br />
signal<br />
signal<br />
function outputs of the decoder that<br />
follow the outputs approach used for main the high signal combined<br />
directly. A high signal signal can signal be combined signal<br />
with any number of add-on signals.<br />
modeapproach approach 206 main<br />
combined<br />
218 A2<br />
A1<br />
address Asignal signal signal<br />
A signal<br />
1 addon<br />
A0<br />
function<br />
dark<br />
A3<br />
1<br />
outputs 4<br />
A4<br />
signal A2<br />
control commands A1<br />
A0<br />
A off signal addon A3<br />
is on<br />
A 4<br />
on signal A4<br />
is off<br />
addon<br />
The add-on signals are<br />
normal<br />
fl ashing<br />
address A1 2<br />
153<br />
150<br />
154<br />
ASignal 151<br />
155<br />
152<br />
156<br />
associated with a proceed<br />
aspect. If the add-on signal<br />
is switched on while the<br />
high signal shows either<br />
stop or shunting aspects<br />
the high signals switches<br />
to “proceed” automatically.<br />
Changing the high signal<br />
aspect to stop will switch<br />
off the add-on signal too.<br />
Mode 218: The disturbed<br />
signal is switched on and<br />
off using commands of an<br />
© Henckens seinen<br />
1<br />
accessory address that is written to the<br />
normal<br />
voie<br />
signal<br />
func- 2<br />
tion<br />
outputs normal normal 3 -<br />
voie voie 4 -<br />
signal signal 5 -<br />
normal contre -<br />
voie voie -<br />
signal signal - -<br />
normal contre contre<br />
voie voie voie<br />
signal signal signal<br />
adress CV of any function output the signal<br />
is connected to (described in more detail<br />
in the example „Haupt- / Vorsignalkombinationen“<br />
contre on contre page 12).<br />
voie voie<br />
An signal Example signal<br />
control commands<br />
A small high signal and a no fl ashing<br />
A DY red<br />
high signal with speed announcement<br />
signal are to control using a Z1-8 decoder with<br />
A green<br />
signal<br />
Signal extension. The fi rst signal shall<br />
A +1 - - - RW DG<br />
signal be controlled by commands of accessory<br />
approach A +1 approach main approach - combined -approach main main GYH combined approach combined main combined main combined<br />
signal address 1, the second one using accessory<br />
signalA<br />
+2 signal signal - signal - signal DY signal address signal signal5.<br />
Address signal 4 is used for the speed<br />
signal<br />
A +2 - - GYV announcement.<br />
signal<br />
A2 A2 A2 Connect A2 the signals A2 to the decoder and<br />
A1 A1 A1 program A1 the A1 confi guration variables<br />
Add-On Signals A0 A0 A0 A0 A0<br />
The add-on signals are A3connected<br />
to A3 according to the following table. The values<br />
the A3 A3 A3<br />
4 4 4 4A4<br />
4A4<br />
A4 given A4in<br />
grey do A4not<br />
need programming<br />
85