Das Qdecoder Handbuch
Das Qdecoder Handbuch
Das Qdecoder Handbuch
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Signal <br />
Ampel <br />
Licht <br />
Controlling dWarF SignalS by inpUt KeyS<br />
To switch signal aspects of dwarf signals<br />
use mode 226 for the function output the<br />
key is connected to. Switch signal aspects<br />
as follows:<br />
once short<br />
press once short<br />
press once long<br />
once short<br />
once short<br />
twice short<br />
once short<br />
3 times short<br />
For controlling the add-on signal a second<br />
key is needed. Use again mode 226 for the<br />
key and switch the add-on signal on and off<br />
by pressing the key.<br />
3.6.4. Signal repeater<br />
Illuminated signal<br />
repeaters are used when<br />
the main signal cannot<br />
be sighted from the usual<br />
distance (about 300 m)<br />
or is obscured at certain<br />
points, due to structures or curvature.<br />
description signal<br />
next signal will neither show<br />
red nor fl ashing yellow<br />
272<br />
next signal will either show red<br />
or fl ashing yellow<br />
273<br />
<strong>Qdecoder</strong> standard mode 2 can be used<br />
for signal repeaters.<br />
Basis base class<br />
Standard standard class<br />
Alleskönner all-in-one class<br />
Mode 2<br />
address A 1 A Signal<br />
function<br />
outputs<br />
Asignal Asignal 1<br />
2<br />
control commands<br />
signal 273<br />
signal 272<br />
3.6.5. braKe teSt SignalS<br />
Brake test signals are used<br />
for communication from<br />
the shunter to the driver<br />
of a train during test of the trains brakes.<br />
description signal<br />
apply brakes 702a<br />
loose brakes 702b<br />
brake test successful 702c<br />
<strong>Qdecoder</strong> offer a special mode for brake<br />
test signals:<br />
mode 96<br />
address A 1 A Signal<br />
function 1<br />
outputs 2<br />
Asignal Schaltbefehle<br />
(off )<br />
Asignal 702a<br />
A +1 signal 702b<br />
A +1 signal 702c<br />
Controlling Brake Test Signals by Input Keys<br />
To switch signal aspects of dwarf signals<br />
use mode 224 for the function output the<br />
key is connected to. Switch signal aspects<br />
as follows:<br />
95
Change language