Das Qdecoder Handbuch
Das Qdecoder Handbuch
Das Qdecoder Handbuch
Erfolgreiche ePaper selbst erstellen
Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.
Signal <br />
Ampel <br />
Licht <br />
signal address mode<br />
A0 A2<br />
A1<br />
A1<br />
A0<br />
A2 A3 A2<br />
A1<br />
A3 A0<br />
A3<br />
A4 A4 key 41<br />
Asignal1 -<br />
-<br />
A6<br />
A5 -<br />
A7 -<br />
CV1=1<br />
A6 CV552<br />
A5<br />
A7 CV555<br />
CV558<br />
CV558<br />
CV550=150<br />
CV553<br />
CV556<br />
CV559<br />
CV562=226<br />
A5 A4 4 Aspeed CV564=4 CV565=206<br />
A6 key 2 - CV567 CV568=226<br />
A7 usable for anything else<br />
Now the same sequence given above<br />
using accessory adress commands can<br />
be controlled using the two keys (“s-s-s”<br />
meens pressing the key three times short).<br />
key 2<br />
short<br />
key 1 short short<br />
short s-s-s short<br />
function outputs<br />
4<br />
3.5.3. SHUnting SignalS<br />
Shunting movements are controlled by<br />
both high and dwarf signals. These signals<br />
do not alter the type of movement, and do<br />
not apply to train movements.<br />
The simplifi ed signals shown at the right<br />
small<br />
are like the shunting signals, except that<br />
high signal<br />
they display red instead of violet, and<br />
apply to both kinds of movements. ... with<br />
small<br />
They<br />
do not change the type of movement. shunting<br />
high signal<br />
They<br />
are like the German “Sperrsignale”, signal and<br />
can be used in the same way to select one<br />
movement from a group that is governed<br />
by a common high signal, or to subdivide a<br />
track segment.<br />
aspect<br />
stop<br />
proceed<br />
<strong>Qdecoder</strong> standard mode 2 can be used<br />
for shunting signals.<br />
Basis base class<br />
Standard standard class<br />
Alleskönner all-in-one class<br />
Mode 2<br />
address A 1 A Signal<br />
function<br />
outputs<br />
Asignal Asignal 1<br />
2<br />
control commands<br />
stop<br />
proceed<br />
Shunting signals can be controlled by keys<br />
too. Use mode 226 for the function outpout<br />
of the decoder the key is connected to.<br />
Pressing the key switches the signal aspect<br />
from stop to proceed and vice versa.<br />
3.5.4. Signal repeater<br />
Illuminated signal repeaters<br />
are used when the main<br />
signal cannot be sighted<br />
from the usual distance<br />
(about 300 m) or is obscured<br />
at certain points, due to<br />
structures or curvature. The<br />
diagonal line indicates that the signal is<br />
clear for no speed restriction. In all other<br />
cases, the horizontal line is displayed.<br />
... with<br />
<strong>Qdecoder</strong> shunting standard mode 2 can once more<br />
be used signal for signal repeaters.<br />
Mode 2<br />
address A 1 A Signal<br />
function<br />
outputs<br />
Asignal Asignal 1<br />
2<br />
control commands<br />
signal is not clear<br />
signal is clear<br />
87