VisCAM RP User Manual (PDF) - Kxcad.net

Installation and licensing with dongle
When using a Windows NT/2000/XP system as licence server, it is advisable to install
the server as NT service with autostart.
Otherwise this installation can be done with default settings without any changes. After
finishing the installation process, the licence server PC should be restarted.
It is recommend to stop and restart the dongle server service after you have plugged-in
the dongle. This is sometimes needed for the server in order to detect the dongle.
5. Activation of VisCAM products with dongle mode
a. Plug-in the provided dongle at an available USB port at your local desktop PC or your
selected licence server (in case of using a floating licence).
b. Start the installed VisCAM version at your local desktop PC.
VisCAM begins to search for a connected dongle automatically and asks the dongle for a
valid VisCAM licence allowing you to run the VisCAM software on your PC.
Without a valid licence the graphic window remains black and the program inactive. As
soon as a valid licence is found, the graphic window will become active and the program
can be used.
At first start-up or also when no dongle could be found, VisCAM will show you a dialog
to select the licence server.
3