VisCAM RP User Manual (PDF) - Kxcad.net

Remove slice
Menu: Slices Icon: No short cut
Deletes individual slices from the slice model
You can remove a slice or an area of slices out of the slice model. Optionally, you can fill the
generated gap by copying an adjacent slice.
The removed slices remain in memory and you can reinsert them using Insert slice. The function
Delete removed data erases the data and you can no longer reinsert them.
HINT: By replacing a faulty slice using a copy of an adjacent one, it is possible to repair the slice
model without modifying the geometry too much.
Dialog Remove slices
Slices to be removed
Specify the range of slices you want to remove. (The bottom most slice is slice number 1).
Replace removed slices
If the originated gap can be filled with an adjacent slice you can select if the one below or the
one on top of the removed slice should be used.
Reference: Insert slice, Delete removed data
270