VisCAM RP User Manual (PDF) - Kxcad.net

+ Front-Front perpendicular =
Front-Back perpendicular - when this option is selected the source entity front side will be
changed to point to the perpendicular direction of the destination entity.
Example:
Fine tuning
+ Front-Back perpendicular =
Align Objects
After selecting the source and destination entities and an orientation you must press the "Apply
alignment" - button in order to enable the fine tuning options. The input red offset field accept
values in millimetres and will move the object along the red axis - both, positive and negative
values are accepted. The input red rotation field accept values in grads and will rotate the object
around the red axis - both, positive and negative values are accepted. The input blue rotation
field accept values in grads and will rotate the object around the blue axis - both, positive and
negative values are accepted. You must press the "Apply alignment" - button anytime you
change the fine tuning data. Pressing the "OK" - button will apply the end orientation and close
the tool.
Example:
209