VisCAM RP User Manual (PDF) - Kxcad.net

Align Objects
Triangle - when you have selected this option you must pick a triangle (white) from the object
you want to align. The triangle center and the triangle normal (yellow arrow) will be used as
source position and source orientation (front side) respectively.
Plane - when you have selected this option you must pick three points from the object you want
to align in order to define a plane. The plane center (white point) and the plane normal (yellow
arrow) will be used as source position and source orientation (front side) respectively. Note that
here the plane orientation depends on the selection order of the points which define it:
V/S
Counter clockwise: Clockwise:
Circle - when you have selected this option you must pick three points from the object you want
to align in order to define a circle. The circle center (white point) and the circle normal (yellow
arrow) will be used as source position and source orientation (front side) respectively. Note that
here the circle orientation depends on the selection order of the points which define it:
V/S
Counter clockwise: Clockwise:
Line - when you have selected this option you must pick two points from the object you want to
align in order to define a line. As source position will be used the line center. The line orientation
(yellow arrow) is the direction from the first picked point to the second one:
Edge - when you have selected this option you must pick an edge from the object you want to
align. As source position will be used the edge center. The edge orientation (yellow arrow) is the
edge normal defined as a sum of the normals of the triangle(s) applied to this edge:
205