VisCAM RP User Manual (PDF) - Kxcad.net

More documents

Recommendations

Info

Define Menu: Position No icon No short cut Allows the definition of the user-defined view position Dialog Define <strong>User</strong> View The rotation values of the current view are displayed. These values can be changed. After the values are acknowledged the user defined view is set accordingly. X-Axis Rotation angle around the X-Axis Y-Axis Rotation angle around the Y- Axis Z-Axis Rotation angle around the Z- Axis Reference: <strong>User</strong> 106
Before Menu: Position Icon: No short cut Displays the model data in the previous view position The previous view position is saved, so that using this function you may switch between the current and the previous view position. Reference: 107
Page 1 and 2:
State: 4. April 2008 VisCAM RP 4.0
Page 3 and 4:
Table Of Contents Move ............
Page 5 and 6:
Table Of Contents Annotate model ..
Page 7 and 8:
Table Of Contents Show contour chan
Page 9 and 10:
Installation note and licensing Ple
Page 11 and 12:
Installation and licensing with don
Page 13 and 14:
Installation and licensing with don
Page 15 and 16:
Product information Module overview
Page 17 and 18:
Product information Module VisCAM V
Page 19 and 20:
Product information 11
Page 21 and 22:
Hatch Support Hatch and build path
Page 23 and 24:
File menu Contains all functions fo
Page 25 and 26:
New Menu: File No icon Short cut: C
Page 27 and 28:
Invokes the dialog for adjustment o
Page 29 and 30:
Dialog Save as Name Select the name
Page 31 and 32:
Save to directory Menu: File No ico
Page 33 and 34:
Close Menu: File Icon: No short cut
Page 35 and 36:
Model With this parameters the mach
Page 37 and 38:
Create job Stop only on errors If t
Page 39 and 40:
Insert Part Menu: File No icon No s
Page 41 and 42:
Open by FTP Menu: File No icon No s
Page 43 and 44:
Save by FTP Menu: File No icon No s
Page 45 and 46:
Save by FTP model file is saved on
Page 47 and 48:
Send view Menu: File No icon No sho
Page 49 and 50:
Print Menu: File Icon: Short cut: C
Page 51 and 52:
View logfile Menu: File No icon Sho
Page 53 and 54:
Edit menu Contains general function
Page 55 and 56:
Undo Menu: Edit Icon: Short cut: Ct
Page 57 and 58:
Next step in job Menu: Edit Icon: S
Page 59 and 60:
Triangles Menu: Edit Icon: No short
Page 61 and 62:
Info Menu: Edit No icon Short cut:
Page 63 and 64: Pick and move Menu: Edit Icon: No s
Page 65 and 66: Pick and rotate Menu: Edit Icon: No
Page 67 and 68: Move Menu: Edit Icon: Short cut: Ct
Page 69 and 70: Remember entered values If this opt
Page 71 and 72: All axes independent: Uses the diff
Page 73 and 74: Convert Menu: Edit No icon Short cu
Page 75 and 76: Copy Menu: Edit Icon: Shortcut: Ctr
Page 77 and 78: Delete Menu: Edit Icon: Shortcut: C
Page 79 and 80: Empty store Menu: Edit No icon No s
Page 81 and 82: Copy to clipboard Menu: Edit No ico
Page 83 and 84: Animation ... Starts an animation o
Page 85 and 86: Cross section Defines the position
Page 87 and 88: Non-closed part with visible revers
Page 89 and 90: Only unmatched Menu: Unmatched edge
Page 91 and 92: Draw unmatched on model Menu: Unmat
Page 93 and 94: Intersecting triangles Menu: View I
Page 95 and 96: Ruler Menu: View No icon No short c
Page 97 and 98: Origin Menu: View No icon No short
Page 99 and 100: Hidden line Menu: View Icon: No sho
Page 101 and 102: Smooth shaded Menu: View Icon: No s
Page 103 and 104: Animation Menu: View No icon No sho
Page 105 and 106: Reset Menu: Position Icon: No short
Page 107 and 108: Top Menu: Position Icon: Short cut:
Page 109 and 110: Front Menu: Position Icon: Short cu
Page 111 and 112: Left Menu: Position Icon: Short cut
Page 113: User Menu: Position Icon: No short
Page 117 and 118: Rotate free Menu: Rotate Icon: No s
Page 119 and 120: Rotate x-axis orthogonal Menu: Rota
Page 121 and 122: Rotate z-axis orthogonal Menu: Rota
Page 123 and 124: Positive y-axis Menu: Rotate Icon:
Page 125 and 126: Negative x-axis Menu: Rotate Icon:
Page 127 and 128: Negative z-axis Menu: Rotate Icon:
Page 129 and 130: Move in xy-plane Menu: Move Icon: N
Page 131 and 132: Positiv x-axis Menu: Move Icon: No
Page 133 and 134: Negative x-axis Menu: Move Icon: No
Page 135 and 136: Zoom menu Menu: View Contains the f
Page 137 and 138: Reset zoom Menu: Zoom Icon: Short c
Page 139 and 140: Zoom out Menu: Zoom Icon: Short cut
Page 141 and 142: Show annotations Menu: Annotation I
Page 143 and 144: Measure point Menu: Annotation Icon
Page 145 and 146: Measure distance Menu: Annotation I
Page 147 and 148: Measure distance • Assign view: T
Page 149 and 150: Measure angle Move: You can activat
Page 151 and 152: Measure radius Menu: Annotation Ico
Page 153 and 154: Measure object Menu: Annotation Ico
Page 155 and 156: Measure object • Assign view: The
Page 157 and 158: Annotate spot For tearing, the refe
Page 159 and 160: Annotate object Tearing: Click on t
Page 161 and 162: Annotate model Menu: Annotation Ico
Page 163 and 164: Add text Menu: Annotation Icon: No
Page 165 and 166:
Show element: The marked element is
Page 167 and 168:
Align objects Aligns an object with
Page 169 and 170:
Fill holes Menu: Facets Icon: No sh
Page 171 and 172:
Stitch triangles Menu: Facets Icon:
Page 173 and 174:
Second point selected Second point
Page 175 and 176:
Adjust triangles Menu: Facets Icon:
Page 177 and 178:
Solve overlaps Menu: Facets Icon: N
Page 179 and 180:
Manage objects Menu: Facets Contain
Page 181 and 182:
Demerge objects Menu: Manage object
Page 183 and 184:
Unify solids Menu: Facets Icon: No
Page 185 and 186:
Filter triangles Menu: Adjust mesh
Page 187 and 188:
Smooth triangles The smoothing fact
Page 189 and 190:
Modify colors Menu: Facets Contains
Page 191 and 192:
Select color Menu: Modify colors Ic
Page 193 and 194:
Set transparency Menu: Modify color
Page 195 and 196:
Attach text Menu: Create 3D-Text Ic
Page 197 and 198:
define text Width and Height of the
Page 199 and 200:
Create 3D-Bitmap Menu: Facets Conta
Page 201 and 202:
Define bitmap Menu: Create 3D-Bitma
Page 203 and 204:
Define_bitmap Creation method It ca
Page 205 and 206:
Define_bitmap Object selection The
Page 207 and 208:
Create base solid Menu: Facets Icon
Page 209 and 210:
Cone lowest detail highest detail C
Page 211 and 212:
Torus Create base solid To create a
Page 213 and 214:
Align Objects Triangle - when you h
Page 215 and 216:
Align Objects In this field you wil
Page 217 and 218:
+ Front-Front perpendicular = Front
Page 219 and 220:
Offset Model Menu: Facets Icon: No
Page 221 and 222:
Before offset After offset (positiv
Page 223 and 224:
Before extrude After extrude (posit
Page 225 and 226:
Booleans Menu: Facets Icon: No shor
Page 227 and 228:
Trim and cut Menu: Facets Icon: No
Page 229 and 230:
Application of trimming mask using
Page 231 and 232:
Hollow model Menu: Facets Icon: No
Page 233 and 234:
Split model "Keep model context for
Page 235 and 236:
Mark holes Menu: Manipulate holes I
Page 237 and 238:
Fill marked holes Menu: Manipulate
Page 239 and 240:
Fill options Menu: Manipulate holes
Page 241 and 242:
Mark triangles Menu: Manipulate tri
Page 243 and 244:
Turn marked Menu: Manipulate triang
Page 245 and 246:
Create surface Menu: Manipulate tri
Page 247 and 248:
Mark surfaces Menu: Manipulate surf
Page 249 and 250:
Turn marked Menu: Manipulate surfac
Page 251 and 252:
Surface options Menu: Manipulate su
Page 253 and 254:
Manipulate shell menu Menu: Facets
Page 255 and 256:
Unmark shells Menu: Manipulate shel
Page 257 and 258:
Delete marked Menu: Manipulate shel
Page 259 and 260:
Slices menu Contains functions for
Page 261 and 262:
Select stack Menu: Slices Icon: No
Page 263 and 264:
Select stack Build time Calculated
Page 265 and 266:
Step stack up Menu: Slices Icon: No
Page 267 and 268:
Show single slice Menu: Slices Icon
Page 269 and 270:
Calculate variable thickness Menu:
Page 271 and 272:
Resolve slice thickness Menu: Slice
Page 273 and 274:
Resolve contour resolution Menu: Sl
Page 275 and 276:
Show contour changes Menu: Slices N
Page 277 and 278:
Delete original data Menu: Slices N
Page 279 and 280:
Insert slice Menu: Slices Icon: No
Page 281 and 282:
Process menu Contains all functions
Page 283 and 284:
Define machine Menu: Process Icon:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Defines the maximum search steps fo
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Hatches • Alternate: Depending on
Page 303 and 304:
Page 305 and 306:
Contact region in Z Pin contact Sin
Page 307 and 308:
Grid offset: Admits a change in the
Page 309 and 310:
Set envelope layout Menu: Process I
Page 311 and 312:
Align to bottom plane Menu: Process
Page 313 and 314:
Orientate parts Menu: Process Icon:
Page 315 and 316:
Move to envelope Menu: Process Icon
Page 317 and 318:
Compensate shrinkage Menu: Process
Page 319 and 320:
Reference: Hollow model, Generate s
Page 321 and 322:
Generate slices Menu: Process Icon:
Page 323 and 324:
Shrinkage compensation: Compensates
Page 325 and 326:
fig. 1: contour intersection Genera
Page 327 and 328:
fig. 3: degenerated edges Generate
Page 329 and 330:
Generate hatches Menu: Process Icon
Page 331 and 332:
Delete hatches Menu: Process Icon:
Page 333 and 334:
Generate supports Menu: Process Ico
Page 335 and 336:
Delete supports Menu: Process Icon:
Page 337 and 338:
Use support estimation Calculate bu
Page 339 and 340:
Use support estimation Calculate bu
Page 341 and 342:
Model menu Contains functions for t
Page 343 and 344:
Repair model Menu: Model Icon: No s
Page 345 and 346:
Build preparation Menu: Model Icon:
Page 347 and 348:
General options Menu: Options No ic
Page 349 and 350:
File options Here you can define se
Page 351 and 352:
Set default unit values Menu: Optio
Page 353 and 354:
View options Facets shading color:
Page 355 and 356:
Automatic repair function: Import o
Page 357 and 358:
Dialog Determination of input data
Page 359 and 360:
Mark untrimmed surfaces: If surface
Page 361 and 362:
Slice options Show spot compensatio
Page 363 and 364:
Display options Defines different a
Page 365 and 366:
Annotation options Snap to edge fac
Page 367 and 368:
Object manager Menu: Options No ico
Page 369 and 370:
Properties: Opens a dialog showing
Page 371 and 372:
store. Copy marked: The selected ob
Page 373 and 374:
Define machine: Opens a dialog to c
Page 375 and 376:
Annotation manager Menu: Options Ic
Page 377 and 378:
Log window Menu: Options No icon No
Page 379 and 380:
Help menu Contains program informat
Page 381 and 382:
Help dialog Menu: Help No icon No s
Page 383 and 384:
Prints the displayed subject or the
Page 385 and 386:
Graphic Menu: Help No icon No short
Page 387 and 388:
CLI interface Menu: Icon: Short cut
Page 389 and 390:
CLI interface When saving the slice
Page 391 and 392:
G-Code interface This tab page is f
Page 393 and 394:
G-Code interface For every Layer th
Page 395 and 396:
Here you can specify any command li
Page 397 and 398:
Profile: N[CL_NR] G01 [xNEXT_X_OPT]
Page 399 and 400:
MJS Interface Menu: Icon: Short cut
Page 401 and 402:
Raster image interface Menu: Icon:
Page 403 and 404:
BMP (PNG-, TIFF-) format options Ra
Page 405 and 406:
SLC interface The export of contour
Page 407 and 408:
200 1 / 200 mm 327 mm 400 1 / 400 m
Page 409:
Reference: Open, Save as, Textures
Page 412:
VisCAM Help 4.0 Resolve slice thick
show all

VisCAM RP User Manual (PDF) - Kxcad.net

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?