VisCAM RP User Manual (PDF) - Kxcad.net

VisCAM Help 4.0
Changes in the connect parameters of a chosen profile are also saved automatically.
Delete profile:
The Delete function removes the selected profile from the profile register.
Profile settings:
Server: Name of the FTP server that is to be connected.
Account: Name of the account for access to the FTP server.
Password: Password corresponding to the specified account.
Directory: After set-up of the connection to the FTP server, an automatic change to the specified
directory takes place.
FTP connection:
Connect establishes the connection to the specified FTP server.
Disconnect suspends the established connection to the specified FTP server.
Connection status:
Underneath the dialog with the connect parameters, the current status is shown.
HINT: The progress in data transfer is shown in case a model file is being downloaded from the
FTP-server. In using the Stop function, data transfer can be suspended at any time.
Open new model
Imports the downloaded model file into a newly disposed workspace.
Insert into active model
Imports the downloaded model file as an additional model into the current workspace.
Automatic placement
Allows automatic placement of the read in model file in the envelope of the chosen machine.
The manner of the placement is defined by the parameters for the build envelope in the Machine
database.
Reference: Open, Move to envelope, Define machine, Surface options, Import options for mesh
files, Slice options, Textures
34