VisCAM RP User Manual (PDF) - Kxcad.net

Show element: The marked element is displayed or hidden.
Draw freehand
Edit element: With this function, you can create or edit an additional text note for the
annotation. You can access this function by a double click on the plus symbol on the right end
of the label, if a text message has already been applied.
Assign view: The current view settings of the annotation are assigned to the element and saved.
Every element stores the view settings (e.g. zoom and rotation) and element position that were
active when the element was generated. Using this function you can replace the saved values
with the current ones.
Restore view: The view settings linked to the annotation are restored and applied. You can
access this function using a double click on the text area of the label.
Reset label: Resets the label to the connection point on the drawing line. This function can also
be accessed by double clicking the type symbol on the left end of the label.
Delete element: Deletes the marked element.
HINT: By recalling the view that is saved within the annotation element, a view that fits to the
element can be set.
Reference: Annotation manager
157