VisCAM RP User Manual (PDF) - Kxcad.net

Move to envelope
Menu: Process Icon: No short cut
Moves selected parts into the build envelope
Using this function, you can move the currently selected part into the build envelope. At this,
part placement depends on the settings in the dialog Define machine.
In principle, the part is moved to the reference position (Define machine - Part position). If the
part does not fit into the envelope or if it collides with another part when it is moved to the
reference position, the part is placed to the closest position to the reference where it fits into the
envelope and does not collide with another part.
If the option Platform center as reference (Define machine - Part position) is enabled, the part is
moved to the platform center.
HINT: If the workspace contains more than one part, you must select one of the parts with the
function Select part first before this part can be moved into the envelope.
Reference: Realign parts, Define machine, Select part
307