VisCAM RP User Manual (PDF) - Kxcad.net

VisCAM Help 4.0
Support material: Price of the used support material.
Machine costs
The machine costs result from the following parameters:
Part height: The height (dimension in Z) of the parts.
Support height: Area between zero and the lower edge of the part where only supports are
generated.
Layer thickness: Slice thickness of the build job.
Part speed: Area exposure speed for the geometry of the part.
Support speed: Area exposure speed for support geometry.
Recoating time: The time the machine needs after finishing one layer before it can process the
next layer. (leveling, recoating, ...)
Build time: The build time resulting from the above parameters.
Hourly rate: Hourly rate of the machine used for processing this job.
Hatches >>
Using this button you can directly call the dialog of the function Define machine and then edit
the hatch parameters there.
Postprocessing
Here you can enter a flat rate for postprocessing the manufactured parts.
Total costs
The sum of the above estimated costs is shown here. Only the activated cost types are
included.
Process data >>
Opens the dialog of the function Define machine, so you can edit the process data.
Material data>>
Opens the dialog of the function Define machine, so you can edit the material data.
Dialog Cost calculation (Slice part)
330