1 - page screenshot of chlodzenie.pl

External pressure setting for tuning 5CSL0-06B
Table 1
[ Notes ]
Static Pressure(mmAq)
Model Name Step CMM
ABNH186HLAD
[UB18 NHD]
ABNH246HLAD
[UB24 NHD]
ABNH306GLAD
[UB30 NGD]
ABNH366GLAD
[UB36 NGD]
ABNH426RLAD
[UB42 NRD]
ABNH486RLAD
[UB48 NRD]
ABNH606RLAD
[UB60 NRD]
0 2 4 6 8
Setting Value
10 12 14 15
High 16.5 235 230 225 215 180 - - - -
Med 14.5 245 238 235 230 215 - - - -
Low 13 254 252 248 245 240 - - - -
High 18 220 205 190 50 1 - - - -
Med 16.5 235 230 220 200 100 - - - -
Low 14 250 240 235 230 210 - - - -
High 26.5 153 150 150 148 130 1 - - -
Med 23 173 173 175 175 170 155 - - -
Low 20 190 190 190 190 190 190 - - -
High 32 230 230 225 220 150 1 - - -
Med 29 240 238 237 235 230 220 - - -
Low 26.5 245 245 243 243 240 240 - - -
High 36 238 235 230 225 220 215 - - -
Med 32 253 250 245 240 235 230 - - -
Low 28 255 255 255 255 250 248 - - -
High 40 230 225 220 215 205 200 190 180 160
Med 35 250 245 240 235 230 220 215 210 200
Low 30 255 255 255 250 245 240 235 230 225
High 50 185 180 174 162 154 140 90 5 1
Med 45 210 205 199 191 189 180 155 138 110
Low 40 230 225 219 215 210 205 193 180 171
1. To get the desired Airflow & ESP combination from the table set the matching value from the table. Value
other than that in table will not give the combinations of airflow & ESP which are mentioned in the table.
2. Table data is based at 230V. According to the fluctuation of voltage, air flow rate varies.
3) Duct work must be designed within the range of on installing the unit.
4) If duct work is designed under External Static Pressure adjust the External Static Pressure applying
air damper.
120 Duct (H)