1 - page screenshot of chlodzenie.pl
1 - page screenshot of chlodzenie.pl
1 - page screenshot of chlodzenie.pl
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety Precautions 5CSL0-06B<br />
If strange sounds, smell or smoke comes from the<br />
product, immediately turn the breaker <strong>of</strong>f or disconnect<br />
the power sup<strong>pl</strong>y cable.<br />
• There is risk <strong>of</strong> electric shock or fire.<br />
Do not open the front grill <strong>of</strong> the product during operation.<br />
(Do not touch the electrostatic filter, if the unit is<br />
so equipped.)<br />
• There is risk <strong>of</strong> physical injury, electric shock, or product<br />
failure.<br />
Turn the main power <strong>of</strong>f when cleaning or repairing the<br />
product.<br />
• There is risk <strong>of</strong> electric shock.<br />
When the product is not to be used for a long time, turn<br />
<strong>of</strong>f the circuit breaker.<br />
• There is risk <strong>of</strong> product damage or failure, or unintended<br />
operation.<br />
Take care to ensure that nobody especially kids could<br />
step on or fall onto the outdoor unit.<br />
• This could result in personal injury and product damage.<br />
CAUTION<br />
Use two or more peo<strong>pl</strong>e to lift and transport the product.<br />
• Avoid personal injury.<br />
Do not install the product where it will be exposed to<br />
sea wind (salt spray) directly.<br />
• It may cause corrosion on the product. Corrosion, particularly<br />
on the condenser and evaporator fins, could cause<br />
product malfunction or inefficient operation.<br />
Keep level even when installing the product.<br />
• To avoid vibration or noise.<br />
Do not install the product where the noise or hot air<br />
from the outdoor unit could damage or disturb the<br />
neighborhoods.<br />
• It may cause a problem for your neighbors and hence dispute.<br />
Always check for gas (refrigerant) leakage after installation<br />
or repair <strong>of</strong> product.<br />
• Low refrigerant levels may cause failure <strong>of</strong> product.<br />
Do not block the inlet or outlet <strong>of</strong> air flow.<br />
• It may cause product failure.<br />
Do not step on or put anyting on the product.<br />
• There is risk <strong>of</strong> personal injury and failure <strong>of</strong> product.<br />
Do not insert hands or other objects through the air<br />
inlet or outlet while the product is operating.<br />
• There are sharp and moving parts that could cause personal<br />
injury.<br />
Be cautious when unpacking and installing the product.<br />
• Sharp edges could cause injury. Be especially careful <strong>of</strong><br />
the case edges and the fins on the condenser and evaporator.<br />
If the refrigerant gas leaks during the repair, do not<br />
touch the leaking refrigerant gas.<br />
• The refrigernat gas can cause frostbite (cold burn).<br />
Do not tilt the unit when removing or uninstalling it.<br />
• The condensed water inside can cause spill and wet the<br />
furniture and the floor.<br />
Do not mix air or gas other than the specified refrigerant<br />
used in the system.<br />
• If air enters the refrigerant system, an excessively high<br />
pressure results, causing equipment damage or injury.<br />
If the refrigerant gas leaks during the installation or<br />
operation ventilate the area immediately.<br />
• Otherwise it can be harmfull for your health.<br />
Do not expose your skin or kids or <strong>pl</strong>ants to the cool or<br />
hot air draft.<br />
• This could harm to your health.<br />
Use a firm stool or ladder when cleaning, maintaining<br />
or repairing the product at an height.<br />
• Be careful and avoid personal injury.<br />
Dismantling the unit , treatment <strong>of</strong> the refrigerant oil, oil<br />
and eventual parts should be done in accordance with<br />
local and national standards.<br />
4.1.1 Points for ex<strong>pl</strong>anation about<br />
operations<br />
The items with WARNING and CAUTION marks in the operation<br />
manual are the items pertaining to possibillties for<br />
bodily injury and material damage in addition to the general<br />
usage <strong>of</strong> the product. Accordingly, it is necessary that you<br />
make a full ex<strong>pl</strong>anation about the described contents and<br />
also ask your customers to read the operation manual.<br />
4.1.2 Note to the installer<br />
Be sure to instruct customers how to properly operate the<br />
unit (especially cleaning filters, operating different functions,<br />
and adjusting the temperature) by having them carry out<br />
operations themselves while looking at the manual.<br />
4.1.3 Selecting installation site for<br />
outdoor units<br />
Select an installation site where the following conditions are<br />
fulfilled and that meets with your customer's approval.<br />
1. Location strong enough to bear the weight <strong>of</strong> the unit.<br />
2. Location accessible and having enough clearance for<br />
inspection and service in the future.<br />
3. Location allowing easy condensate drainage suitable gradient<br />
<strong>of</strong> the unit and the drain pipe.<br />
4. Piping between the indoor and outdoor unit is possible<br />
within the allowable limits.<br />
356 Installation <strong>of</strong> outdoor unit