03.06.2013 Views

1 - page screenshot of chlodzenie.pl

1 - page screenshot of chlodzenie.pl

1 - page screenshot of chlodzenie.pl

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Safety precautions<br />

3.1.1 Points for ex<strong>pl</strong>anation about<br />

operations<br />

The items with WARNING and CAUTION marks in the operation<br />

manual are the items pertaining to possibillties for<br />

bodily injury and material damage in addition to the general<br />

usage <strong>of</strong> the product. Accordingly, it is necessary that you<br />

make a full ex<strong>pl</strong>anation about the described contents and<br />

also ask your customers to read the owner's manual.<br />

1. Note to the installer<br />

Be sure to instruct customers how to properly operate the<br />

unit (especially cleaning filters, operating different functions,<br />

and adjusting the temperature) by having them carry out<br />

operations themselves while looking at the manual.<br />

3.1.2 Selecting installation site for<br />

indoor units<br />

1. Select an installation site where the following conditions<br />

are fulfilled and that meets with your customer's<br />

approval.<br />

1) Location strong enough to bear the weight <strong>of</strong> the unit.<br />

2) Location accessible and having enough clearance for<br />

inspection and service in the future.<br />

3) Location allowing easy condensate drainage and suitable<br />

gradient <strong>of</strong> the unit and the drain pipe.<br />

4) Piping between the indoor and outdoor unit is possible<br />

within the allowable limits.<br />

5) Location free from electrical noise.<br />

6) Location allowing optimum air distribution without any<br />

blocking to air flow.<br />

7) Location having no risk <strong>of</strong> flammable gas leakage.<br />

8) Location free from mineral oil mist or an oil spray or<br />

vapor exam<strong>pl</strong>e in kitchen .It could result in leakage .<br />

9) Location free from corrosive gases such as sulphurous<br />

acid gas because it corrodes the copper pipes or soldered<br />

parts resulting in leakage .<br />

10) Location free from any machinery emitting electromagnetic<br />

waves which may disturb the control system<br />

thus causing malfunction <strong>of</strong> the unit .<br />

11) Location free from flammable gases , carbon fibre , or<br />

ignitable dust suspensions in the air or where volatile<br />

flames are handled like gasoline or thinner. Operating<br />

in such conditions may result in fire .<br />

12) Install the indoor and outdoor units, power sup<strong>pl</strong>y<br />

wiring and connecting wires at least 1m away from<br />

televisions or radios in order to prevent image interference<br />

or noise. (Depending on the radio waves, a<br />

distance <strong>of</strong> 1m. may not be sufficient enough to eliminate<br />

the noise.)<br />

5CSL0-06B<br />

13) Consider whether the <strong>pl</strong>ace where the unit will be<br />

installed can support the full weight <strong>of</strong> the unit, and<br />

reinforce it with boards and beams, etc. If needed<br />

before proceeding with the installation. Also, reinforce<br />

the <strong>pl</strong>ace to prevent vibration and noise before<br />

installing.<br />

14) The indoor artcool, artcool mirror, wallmount unit may<br />

not be directly installed on the wall. Use the attached<br />

installation <strong>pl</strong>ate before installing the unit.<br />

15) Obey the local and national regulations and limits<br />

regarding airconditioner installation.<br />

320 Installation <strong>of</strong> indoor unit

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!