WSCAD51 Getting Started - FTP Directory Listing

Getting Started
component has been positioned you can place the reference name where you want,
recommended is centrally above the symbol.
94
Now activate the option 'Automatically' in the group 'Placing' within
the Control cabinet manager. Double click in the list on
MPCBs, '-F2' and '-F3' and the components are positioned
automatically in the Control cabinet layout. Again, position the
reference name centrally above the components. Position the in the
'automatic circuit breaker 2pole' '-F4' in the same way.
Next, place a symbol on the second top hat rail. Turn the automatic
positioning off again. Double click on the entry 'CPU 315-2 DP_MC'
and place it at 787,5/600,0 mm. Set the input ('SM 321 1BH00
16x24V DC') and output ('SM 322 1BH00 16x24V DC') unit as you
did earlier with the MCBs, using 'Automatically' placing and a 'double
click'.
Turn 'Automatically' off again and repeat the process for the contactors. Begin with the
contactor '-K1' 'DILER-40-G', the co-ordinates are 787,5/450,0 mm. Turn
'Automatically' on an position the coils '-Q4'; '-Q5' and '-Q6' ('DIL00M-G/22') again
with a 'double click'.
Next , place the transformer. Turn 'Automatically' off again. This time there is no
corresponding symbol for the transformer in the database, so a rectangle is drawn, based
on the dimensions given in the database. Position this at 1200,0/762,5 mm.
Inserting terminals
There are various ways of inserting terminals into the layout diagram, either one by one
or as a complete strip. In this example we will place a complete terminal strip.
Place the first terminal '-X0, Terminal Insta. 2,5mm' without 'Automatically' placing
and position it to the co-ordinates 787,5/337,5 mm. To place further terminals, select
the same terminal again in the Control cabinet manager.