WSCAD51 Getting Started - FTP Directory Listing

Design capture
Assign the 'NO_Contactor' to the 'Emergency Off' coil. After the contact has been assigned, the
cross-reference is applied online to the contact and the contact comb after clicking the left mouse
button anywhere in the drawing field. Exit the Symbol Explorer with 'Cancel'.
Hint
This procedure can also be reversed. This means that a contact can
be loaded first and a part number (from the database) can be
assigned. As the part is assigned, the automatic process identifies
and manages the contact arrangement even when the coil is not yet
positioned on the drawing sheet.
Cross-reference Navigator
Now you can learn how to access the position a cross-reference is pointed to, quickly
and easily.
Let's use the contact comb of the contactor 'Feed forward' as an example. Note the
cross-reference text at the left of the comb; this represents the position of the associated
contact.
61