WSCAD51 Getting Started - FTP Directory Listing
WSCAD51 Getting Started - FTP Directory Listing
WSCAD51 Getting Started - FTP Directory Listing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Getting</strong> <strong>Started</strong><br />
Full automatic Contactor Manager<br />
Professional version: Placing components by using full automatic Contactor Manager.<br />
Hint<br />
60<br />
To avoid assigning too many contacts, turn off the semi-automatic<br />
process under 'Automatic funct. – Contactor Manager – Semiautomatic'.<br />
From now on, the automatic Contactor Manager will<br />
control every contactor or contact added to the project.<br />
The assignment of coils to contacts is carried out in the fully automatic Contactor Manager. After<br />
the coil or contact is positioned, a database part number is allocated.<br />
First place a coil 'Coil' (this is an auxiliary contactor) at 37.5 / 82.5 mm with a click on the left<br />
mouse button. The database selection window opens. Select 'K40R DIL R40-G'. Enter as 'Function<br />
text' 'Emergency Off' and place it at the same level as the texts for the valves, centrally under the<br />
coil. Quit the settings and accept the suggested position of the contact comb with a click on the left<br />
mouse button. You don't have to move the cursor !!<br />
The next step is to load a self-holding contact 'NO_Contactor' of the 'Emergency Off'<br />
contactor. Position the 'NO_Contactor' on the coordinates 60.0 / 105.0 mm . This brings you<br />
back to the 'Existing Values' in the Contactor list. Unlike the semi-automatic process, you can see<br />
all the available contacts.