WSCAD51 Getting Started - FTP Directory Listing

Design capture
Exit the Settings menu. The dialog 'Cables in the database' will appear. As you have
not yet drawn any cables, the dialog is still empty.
Now assign the colour codes to the individual cable conductors with a double click on the
displayed colours under 'Color Codes'. Go ahead from left to right. Enter the sequence
as 'bk'+'bl'+'bn'+ 'gn/yw', this corresponds to the DIN color sequence black, blue, brown,
yellow/green. End the allocation with 'OK' and position the reference name on 75.0 / 65.0
mm. The color codes are immediately transferred to the individual conductors.
Note that you are still within the function 'Draw Cables'. Draw another cable line above
the Motor -'-M2' (Worm), from 140.0 / 65.0 mm to 177.5 / 65.0 mm. The cable will be given
the name '-W102' and is of the same type as '-W101'. The colour-coding is the same.
Splitting cables
A further possibility is to split the cables.
Go to page 2 and draw a cable line for 'Table up' from 77.5 / 97.5mm to 97,5 / 97.5mm. In
the input line for the Reference Name, insert '-W103'. Choose the cable type 'NYM-J 4x1.5
mm²'. The colour of the conductor is 'bk', confirm with 'OK'.
Draw another cable line from 77.5 / 75.0 mm to 97.5 / 75.0 mm, dismiss the prompt for the
reference name and you will see the dialog for the 'Cables in the database':
79