WSCAD51 Getting Started - FTP Directory Listing
WSCAD51 Getting Started - FTP Directory Listing
WSCAD51 Getting Started - FTP Directory Listing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Hint<br />
The reference name is automatically entered by the PLC manager<br />
and will be put into the desired format later. Meanwhile, refer to<br />
the function text (here: !Motor control).<br />
Design capture<br />
Now assign the input symbol (an input channel) to the PLC module. Select the connection<br />
'E0.0' (You could of course assign another input if you wish). For the comment write in<br />
'Switch forward' and confirm it with 'OK'.<br />
The reference was generated automatically from the main element ('Digital Input SM<br />
321-1BH00 16x24V DC') to the side element ('Digital Input'). The position of the<br />
comment and the reference are defined in the symbol editor and are shown in the correct<br />
position.<br />
Again load a 'Digital Input' and place it with a 'double' click' or on<br />
200.0 / 170.0 mm. Again choose the '!Motor Control' and assing it to the connection<br />
'E0.1'. The comment is 'Switch backward'.<br />
Close the dialog with 'OK' and quit the appearing menu 'Symbol Parameters' by<br />
clicking the left mouse button anywhere in the drawing.<br />
63
Change language