WSCAD51 Getting Started - FTP Directory Listing

More documents

Recommendations

Info

<strong>Getting</strong> <strong>Started</strong> Loading the individual PLC channels first As with the contactors, the PLC Manager also enables you to load the inputs and outputs (side elements) before the PLC main module is loaded. The PLC Manager manages a virtual PLC main module (a 'map' of the PLC inputs and outputs). First load a digital PLC output with the 'Symbol Explorer' and place it on the coordinates 235.0 / 110.0 mm with a single mouse click. This opens the database selection window. Select the extension module 'Digital Output SM 322-1BH00 16x24V DC' and confirm with 'OK'. Now enter the function text '!Table control' and position it where ever you like. Abort the 'Symbol Parameters' menu and assign the current connection to channel 'A0.0'. Enter as PLC-Text 'Motor Worm on' and exit the 'Symbol Explorer'. Hint 64 Obviously we would not need an Input and an Output module for our small example. This serves only to demonstrate the functions of the PLC manager. You may have realized that there is no cross-reference at this time. However, as we have not yet loaded the PLC main module, cross-referencing is not yet possible. Now we have to load two digital outputs for the control of the valves -Q1 and –Q2. Place them on the coordinates 95.0 / 110.0 mm and 130.0 / 110.0 mm but at this time with a double click with the left mouse button. This allows you to skip the database selection dialog (which is not needed here) and to make the channel allocation directly. (If you do accidentally activate the database, simply exit it and this will take you to the assignment menu). Assign the outputs for –Q1 or –Q2 to the digital output 'Digital Output SM 322-1BH00 16x24V DC' (Function text: '!Table control'). Enter the PLC text for both valves -Q1 and -Q2 as: 'Table up' and 'Table down’. Tip A double click when loading the PLC main module takes you directly to the assignment of this symbol to a PLC module the PLC manager is already controlling. The rule is: every selection in the database menu creates a new PLC module in the 'PLC selection', so whenever you double click or quit out of the database selection window, the assignment menu will always appear. You can still delete any symbol with the 'Delete' command. The database dialog is not necessary because we have already set the parameters by inserting the individual PLC connection. Now you only need to assign the symbol to a PLC module controlled by the 'PLC selection'. Main modules which have not yet been assigned are marked with a '*'. These are 'virtual' PLC modules. Position the Output Unit Now go back to page 3 and load the symbol 'Digital Output SM 322-1BH00 16x24V DC' from the library 'EXAMPLE'. Position the symbol with a double click at 195.0 / 147.5 mm. The 'PLC selection' dialog opens up again.
Design capture Select the entry 'Digital Output SM 322-1BH00 16x24V DC' and confirm the selection with 'OK'. Leave the menu 'Symbol Parameters' and cancel the 'Symbol Explorer'. Please note that all used PLC channels are referenced with PLC and cross-reference text. The schedule gives you a complete overview of all PLC channels and their functions. Complete the Drawing Now complete the drawing on page 2 with the missing PLC inputs. Load two 'Digital Output' for the contactor 'Feed forward' and 'Feed backward' and position them at 165.0 / 110.0 mm and 200.0 / 110.0 mm. The comments are 'Motor forward' and 'Motor backward'. 65
Page 1:
WSCAD51 Getting Started
Page 4 and 5:
Table Of Contents General..........
Page 7 and 8:
Introduction General With WSCAD 5 y
Page 9:
WebHelp supports you with just the
Page 12 and 13:
Getting Started Black Box - Desti
Page 14 and 15:
Getting Started UFD-management with
Page 17 and 18:
Working with WSCAD 5 Restrictions o
Page 19 and 20: WSCAD 5.1 Demo Working with WSCAD 5
Page 21 and 22: Enter for example an 'A' as first v
Page 23 and 24: Function keys Working with WSCAD 5
Page 25: Configuring the screen layout Worki
Page 28 and 29: Getting Started Setting up a projec
Page 30 and 31: Getting Started The project 'WSCAD
Page 32 and 33: Getting Started Hint 26 You will al
Page 34 and 35: Getting Started Adjusting the pract
Page 36 and 37: Getting Started Page configuration
Page 38 and 39: Getting Started To load a component
Page 40 and 41: Getting Started Placing symbols wit
Page 42 and 43: Getting Started Select '1LA7083-6AA
Page 44 and 45: Getting Started Now place another m
Page 46 and 47: Getting Started The automatic funct
Page 48 and 49: Getting Started Close the Terminal
Page 50 and 51: Getting Started Hint 44 Circuit dia
Page 52 and 53: Getting Started Select New and you'
Page 54 and 55: Getting Started Replace the 'Functi
Page 56 and 57: Getting Started Make no changes in
Page 58 and 59: Getting Started Connecting coils an
Page 60 and 61: Getting Started Contactor Manager A
Page 62 and 63: Getting Started After selecting mak
Page 64 and 65: Getting Started After OK button the
Page 66 and 67: Getting Started Full automatic Cont
Page 68 and 69: Getting Started Position the cursor
Page 72 and 73: Getting Started Modifying the PLC b
Page 74 and 75: Getting Started The symbols of dest
Page 76 and 77: Getting Started Inserting corners T
Page 78 and 79: Getting Started Inserting potential
Page 80 and 81: Getting Started Enter 'P11' as the
Page 82 and 83: Getting Started Finally, go back to
Page 84 and 85: Getting Started Click 'New' to load
Page 86 and 87: Getting Started As you see, the cab
Page 89 and 90: Automatic functions General WSCAD 5
Page 91 and 92: Automatic functions paths) of the c
Page 93 and 94: Automatic functions Set the File ty
Page 95 and 96: Exit the dialog with 'OK'. Automati
Page 97 and 98: Hint The data is in mm and refers t
Page 99 and 100: Automatic functions Now we need a '
Page 101 and 102: Automatic functions Note the format
Page 103 and 104: Hint Please ensure that the option
Page 105: Automatic functions Repeat this pro
Page 108 and 109: Getting Started If you want to modi
Page 110 and 111: Getting Started The Full project au
Page 112 and 113: Getting Started If 'By Co-ordinates
Page 114 and 115: Getting Started Accept the settings
Page 116 and 117: Getting Started Select the required
Page 118 and 119: Getting Started Now you are going t
Page 121 and 122:
WSCAD Services In conclusion ... In
Page 123:
Epilog WSCAD electronic GmbH was fo
show all

WSCAD51 Getting Started - FTP Directory Listing

Create successful ePaper yourself

Delete template?

Save as template?