The IBM eServer BladeCenter JS20 - IBM Redbooks

PASSW0RD. The 0 in the password is a zero. In production environments,
consider changing these defaults.
5. From the Management Module Web interface, select MM Control → Network
Interfaces.
6. The form window shown in Figure 5-2 is displayed. Enter the desired external
and internal IP addresses, subnet masks, and default gateway for the
Management Module. Then click Save to store the new IP addresses.
Figure 5-2 IP address configuration
72 The IBM Eserver BladeCenter JS20
Note: The default user ID is USERID, and the default password is
PASSW0RD. The number zero is between the W and the R.