519FLA REPAIR MANUAL

3.1.2 Front axle housing and front
axle gears
Press inner bearing races 37.130/120 +
37.130/130 on to intermediate gear with
drift 5x46 002 219, inner bearing races
37.080/120 + 37.080/130 on to pinion
and inner bearing races 37.150/120 +
37.150/130 on to helical gear with drift
5x46 002 218.
Heat the front axle housing strongly at
the bearing seats with a hot-air blower
and insert the outer bearing races for the
intermediate and helical gears and the
pinion.
3.1.3 Pinion shaft
Clamp the transmission housing in holder
5x46 002 165 and suspend from or attach
to assembly trolley or workbench mounting
with the differential opening
upwards.
To do this, screw the eye with M8 thread
into the tapped hole in the housing. Use a
crane to suspend the holder in the assembly
trolley or workbench mounting and
secure or fasten it there.
Important:
For adjusting work, see Chapter 1.4.2
3.1/4
CD
5 HP 19 FL © ZF Getriebe GmbH Saarbrücken
00005
99183
99138
00/08/01