519FLA REPAIR MANUAL

99008
99009
99010
00/08/01 5 HP 19 FLA © ZF Getriebe GmbH Saarbrücken CD
Dismantling
5.4 Helical/intermediate gears and
front axle shaft
5.4.1 Helical gear
Using puller (Rollex 501349) 5x46 501
349, core insert 5x46 001 956 and basic
unit (Rollex 1A) 5x46 503 491, pull off
both inner bearing races.
5.4.2 Intermediate gear
Using puller (Rollex 48548) 5x46 485
481, core insert 5x46 001 955 and basic
unit (Rollex 1A) 5x46 503 491, pull off
both inner bearing races.
5.4.3 Front axle shaft
Drive the shaft sealing ring out of the
front axle shaft with a suitable tool.
Using puller 5x46 032 010 (Rollex
32010x1), core insert 5x46 002 000 and
basic unit 5x46 503 491 (Rollex 1A),
pull off the large inner bearing race.
Using puller 5x46 501 349 (Rollex
501349) and core insert 5x46 001 956,
pull off the small inner bearing race.
5.4/1