519FLA REPAIR MANUAL

00005
99040
99042
00/08/01 5 HP 19 FLA © ZF Getriebe GmbH Saarbrücken CD
6.2.1.5 Intermediate and helical gear
Using sleeve 5x46 002 219, press in
roller bearings 37.130/120 and
37.130/130 on intermediate gear, using
sleeve 5x46 002 218, press in roller bearings
37.150/120 and 37.150/130 on
helical gear.
6.2.1.6 Front axle shaft
Using sleeves 5x46 002 218 and 5x46
002 257 press on roller bearings
37.080/130 and 37.080/140 in the mandrel
press.
Using fixture 5x46 001 332 in the mandrel
press, force shaft sealing ring
37.080/120 fully in.
Important:
For adjusting work, see Chapter 4.4
6.2.1.7 Adding remaining parts to
intermediate housing
Using fixture 5x46 002 282 in the mandrel
press, force shaft sealing ring 37.240
in fully.
Bushing 37.020, 2 cylindrical pins
37.310 and breather 90.480 must already
be in the housing.
The same conditions apply to the
breather as for the one in the main transmission
housing.
The bushing must be pressed in to
10 ± 0.5 mm.
6.2/5