519FLA REPAIR MANUAL

Place the differential-side inner bearing
race on the measuring plate.
Place the outer bearing race on the inner
race and apply weight 5p01 010 355.
Place the set of components to be
measured centrally under the dial gauge
sensor.
Rotate the bearing several times. Read
off dimension ➮ M L
Installed bearing height L is sleeve height
H H minus M L
Calculation:
L = H H - M L
Read off pinion dimension R.
The shim for adjusting pinion position S
is obtained from
Calculation:
S = G - L - R
Example:
MER = 93.6 mm
MMR = 60 mm
MR = -0.03 mm
R = 96 mm
H H = 57 mm
M L = - 0.76 mm
G = 93.6 + 60 - 0.03
= 153.57 mm
L = 57 - 0.76
= 56.24 mm
S = 153.57 - 56.24 - 96
= 1.33 mm
1.4/22
CD
5 HP 19 FL © ZF Getriebe GmbH Saarbrücken
00002
00/08/01