519FLA REPAIR MANUAL

00093
99033
99034
00/08/01 5 HP 19 FLA © ZF Getriebe GmbH Saarbrücken CD
6.2.1.4 Transfer box housing
Using drift 5x46 002 259 in the mandrel
press, force needle roller sleeve 36.130
into the transfer box housing and secure
with snap ring 36.150.
Using drift 5x46 002 261 in the mandrel
press, force needle roller sleeve 36.030
into the transfer box housing and secure
with snap ring 36.040.
Insert rear axle shaft 36.060 into the
transfer box housing, pressing in if necessary
with a suitable drift in the mandrel
press.
Install disc 36.100 with 3 screws 36.120
and the oil dam with 2 screws 36.120 in
the transfer box housing.
(Tightening torques: see Chapter 1.5)
Insert output gear 36.180 into the needle
roller sleeve in the transfer box housing
and press in using a suitable drift in the
mandrel press.
6.2/3