519FLA REPAIR MANUAL

99011
99012
00085
00/08/01 5 HP 19 FLA © ZF Getriebe GmbH Saarbrücken CD
5.5 Housing sections
5.5.1 Intermediate housing
Drive the shaft sealing ring out of the
intermediate housing with a suitable tool.
Remove outer bearing races with tool
5x46 022 002 (Kukko 22-2) combined
with 5x46 021 008 (Kukko 21-8) or 5x46
021 007 (Kukko 21-7).
Warning:
Protect sealing faces against damage with
plastic plates. The outer bearing races
must remain with the correct bearings, or
else noise problems will result. Do not
accidentally confuse them! The breather
remains in the housing unless damaged.
5.5.2 Vibration damper
Drive the shaft sealing ring out with a
suitable tool, and take it off.
5.5.3 Transfer box housing
Using drift 5x46 002 278, press the nut
for the expansion bolt (output flange) out
of the output gear in the mandrel press.
5.5/1