519FLA REPAIR MANUAL

Place needle roller thrust bearing 32.120
in spider.
Installed position (see picture)
Insert sun gear shaft 32.140 and check
for correct operation.
If installed correctly, the spider rotates in
te opposite direction to the sun gear
shaft.
Push angle washer 32.160/110, needle
roller thrust bearing cage 32.160/120 and
thrust washer 32.160/130 over the end of
intermediate shaft 32.180 and insert the
intermediate shaft.
Installed position (see picture)
3.5/4
CD
5 HP 19 FL © ZF Getriebe GmbH Saarbrücken
99194
99195
99196
00/08/01