519FLA REPAIR MANUAL

3. Installation 3.1/1
Adjustments 3.1/2
3.1 Installing pinion shaft and differential 3.1/3
3.1.1 Differential 3.1/3
3.1.2 Pinion shaft 3.1/4
3.1.3 Installing pinion shaft in transmission housing 3.1/5
3.1.4 Installing differential in transmission housing 3.1/6
3.1.5 Installing pinion-shaft sealing ring, parking lock gear and
bearing race 3.1/8
3.2 Installing shift and parking lock mechanism 3.2/1
3.3 Adding parts to tower and installing 3.3/1
3.3.1 Planetary gear set III 3.3/1
3.3.2 Clutch F 3.3/3
3.3.3 Brake DG with 1st gear freewheel 3.3/5
3.3.4 Installing tower 3.3/9
3.4 Adding parts to front-axle output and installing 3.4/1
3.5 Installing planetary gear sets I and II 3.5/1
3.6 Input and installing 3.6/1
3.6.1 Clutch E 3.6/1
3.6.2 Clutch A 3.6/4
3.6.3 Clutch B 3.6/7
3.6.4 Installing input 3.6/7
3.7 Brake C oil supply and installing 3.7/1
3.7.1 Oil supply 3.7/2
3.7.2 Checking drag torque of pump (oiled) 3.7/3
3.7.3 Brake C 3.7/4
3.7.4 Installing oil supply and brake C 3.7/5
3.8 Flange shaft and installing 3.8/1
3.9 Installing valve body, oil filter and oil pan, position switch and converter 3.9/1
3.9.1 Installing valve body, oil filter and oil pan 3.9/1
3.9.2 Installing position switch and converter 3.9/6
3.9.2.1 Installing and checking position switch 3.9/6
3.9.2.2 Installing converter 3.9/7
3.9.3 Installing breather cover and protective transit caps 3.9/8
00/08/01 5 HP 19 FL © ZF Getriebe GmbH Saarbrücken CD
III