Tender Documents - Oil India Limited

1.2 The horsepower rating of the rigs offered should be between 500 HP
(Minimum) -750 HP (Maximum). Further, the rigs offered should be self
elevating mast and sub-structure (as per API standard). The details of the
rigs are given in Section – II, Terms of Reference and Technical
Specification.
1.3 Vintage: The Work-over Rig units including the accessories and equipment
offered should not be older than 8 years from the date of technical bid
opening (But all the tanks to be provided for mud/ brine system and mud
plant should be new). Documentary proof of date of manufacturing along
with Manufacturer‟s certificate should be provided with the bid.
1.4 Residual life: The offered work over rigs if not brand new unused rigs,
should have a minimum residual life of 7 years as on 30-June-2011. The
bidder should submit a certificate in original from any one of the following
inspection agency as per proforma enclosed at Appendix-1:
(i)
(ii)
(iii)
(iv)
M/s Bureau Veritas
M/s Det Norske Veritas
M/s Lloyd‟s
M/s Oil Field Audit Services
Note: The certificate should clearly indicate and confirm without any
ambiguity the following:
1. Name and address of the owner of the rigs after due verification of
documents.
2. Confirmation that the rigs meet the technical specification as laid
down at Section-II of the Tender Document.
3. Make, Model, Capacity/Rating, year of manufacture and residual life
as inspected for each of the component as well as for the overall rigs.
4. In case of brand new rigs, the bidder should submit a certificate in
original from the manufacturer as per Proforma enclosed at
Appendix-2 along with technical bid. The certificate from
manufacturer should also clearly indicate the committed date of
readiness of the rigs for shipment after due inspection and
certification from any one of the classification societies specified
above prior to shipment.
2.0 EXPERIENCE : Bidder shall meet the following minimum criteria :
2.1 The bidder shall have at least 2(two) years experience of providing Drilling /
Work-over services to oil (E&P) Company with charter hired rig or with its
in-house rigs (through MMC) in the last 7 years as on the Bid Closing Date
(Technical).
2.2 In case, the bidder is an Indian company / Indian joint venture company,
either the Indian company/Indian joint venture company or its technical
collaboration partners should meet the criteria laid down at Para 2.1 above.