Tender Documents - Oil India Limited

) OTHER ITEMS:
i) Skid Mounted Well site Chemical Go-down.
ii) Crew Basha
iii) Tool Pusher‟s Office
iv) Rig Ware House
v) First Aid Hut
vi) Thread dope (Z-50 type) for lubrication of threads.
7.8 HANDLING TOOLS: Contractor shall be provided the following for each
rig [All handling tools mentioned below should be available at site in good
working condition]
(a)
(b)
Elevators:
(i) For 2.7/8” EUE Tubing – 2 Nos.
(ii) For VAM Tubing (2.93” bore) – 2 Nos.
(iii) For 3.1/2” Drill Collar – 1 No.
Slips:
(i) Rotary Hand Slip for 2.7/8” Tubing – 2 Nos.
(ii) Rotary Hand Slip for 3.1/2” Drill Collar – 1 No.
(iii) Manual / pneumatic Spider Slip for 2.7/8” Tubing & 2.7/8”
Drill pipe – 1 No.
NOTE: Slips should have segment for 2.3/8” tubing & 2.3/8” Drill
pipe also.
(c)
Rig Tongs: Complete sets of Rotary tongs in pairs with 2 sets of extra
jaws and replaceable spares of required capacities & sizes to handle
the following tubular:
(i)
(ii)
2.7/8” OD Drill pipes & 3.1/2” drill collars.
Tubing tongs ( both 2.7/8” EUE and VAM)
(d)
(e)
(f)
(g)
(h)
(i)
Power Tubing Tong: For 2.7/8” tubing
Drill Collar safety clamps: For 3.1/2” Drill Collars
Cross-over subs: For various sizes of tubular mentioned above [The
bidder should provide necessary substitutes required to use 2.7/8”
EUE and 2.7/8” VAM tubing connection.]
Tubing Shut-in valve: 2” x 5000 psi working pressure for following
tubulars:
1. One (1) no. suitable for 2.7/8” EUE tubing
2. One (1) no. suitable 2.7/8” VAM tubing
Tubing Circulating Head
1. One (1) no. suitable for 2.7/8” EUE tubing
2. One (1) no. suitable 2.7/8” VAM tubing
Choke and Kill Manifold: One no. Choke and Kill manifold of not
less than 10M working pressure fitted with NRV in kill lines. (To