Tender Documents - Oil India Limited

7. To measure the flow rate and to analyze the produced fluid as
and when required.
8. To maintain the tubing tally including any down hole
production equipment run.
9. All necessary surface connections to be made by the Contractor
for enlivening of the wells using nitrogen pumping unit. Crane
services to be provided by OIL in case any CTU operation is
carried out. However, in case OIL advised the Contractor to
mobilize the Crane, the services required during CTU operation
is to be provided by Contractor.
10. Hooking up of the steam lines to production tanks and steam
jacket.
ii) Schedule -2
1. All production equipment's namely X-Mas tree, Tubing head
spool, Hanger flange / Tubing hanger, Separators with all
accessories, Tanks, Steam jacket, Ground X-Mas tree, Tubings
(both EUE and VAM), Pipes for surface fittings and flare line etc.
will be provided by OIL‟s Production Oil Department.
2. All tools required for making up of the above equipments are to
be supplied by the Contractor i.e. Elevators, slips, Tubing tong,
Coupling tong, Hydraulic pumps and other necessary
equipment's for hydraulic testing of the separators, X-Mas tree,
Ground X-Mas tree, Steam Jacket etc to be provide by the
Contractor.
3. Consumables such as thread dopes to be provided by the
Contractor.
C. TRANSPORTATION SERVICES
i) OIL’S RESPONSIBILITY
1) Transportation of Company‟s personnel and materials/
Equipment (those not attached with the rig) will be Company‟s
responsibility.
2) Cement shall be supplied by OIL. To & fro collection,
transportation, loading / unloading, stacking etc of these cement
shall be carried out by OIL, as and when required.
3) In case of well emergency, it is the responsibility of OIL to
supply/ transport Chemicals, Cement etc. to well site.
4) Well consumables like casing, tubing, well head etc. shall be
supplied by OIL. „To‟ & „fro‟ collection, transportation including
loading/unloading, stacking etc. at well site of these
consumables will be provided by OIL.